LM339.PDF

LM139, LM139A, LM239, LM239A,

LM339, LM339A, LM339Y, LM2901

QUAD DIFFERENTIAL COMPARATORS

SLCS006E – OCTOBER 1979 – REVISED MAY 2000

Single Supply or Dual Supplies

D, DB, J, N, NS, PW, OR W PACKAGE

(TOP VIEW)

Wide Range of Supply Voltage

...2 V to 36 V

1OUT

2OUT

V CC

2IN–

2IN+

1IN–

1IN+

OUT3

OUT4

GND

4IN+

4IN–

3IN+

3IN–

Low Supply-Current Drain Independent of

Supply Voltage . . . 0.8 mA Typ

Low Input Bias Current . . . 25 nA Typ

Low Input Offset Current ...3 nA Typ

(LM139)

Low Input Offset Voltage ...2 mV Typ

Common-Mode Input Voltage Range

Includes Ground

FK PACKAGE

(TOP VIEW)

Differential Input Voltage Range Equal to

Maximum-Rated Supply Voltage . . .

36 V

Low Output Saturation Voltage

Output Compatible With TTL, MOS, and

CMOS

V CC

2IN–

2IN+

3212019

GND

4IN+

4IN–

Package Options Include Plastic

Small-Outline (D, NS), Shrink Small-Outline

(DB), Thin Shrink Small-Outline (PW), and

Ceramic Dual Flatpack (W) Packages,

Ceramic Chip Carriers (FK), and Standard

Plastic (N) and Ceramic (J) DIPs

910111213

description

NC – No internal connection

These devices consist of four independent voltage comparators that are designed to operate from a single

power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the

difference between the two supplies is 2 V to 36 V and V CC is at least 1.5 V more positive than the input

common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to

other open-collector outputs to achieve wire-AND relationships.

The LM139 and LM139A are characterized for operation over the full military temperature range of –55

to 125

C. The LM239 and LM239A are characterized for operation from –25

C to 125

C. The LM339 and

LM339A are characterized for operation from 0

C to 70

C. The LM2901 is characterized for operation from

–40

C to 125

symbol (each comparator)

IN+

OUT

IN–

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

On products compliant to MIL-PRF-38535, all parameters are tested

unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

POST OFFICE BOX 655303

•

DALLAS, TEXAS 75265

LM139, LM139A, LM239, LM239A,

LM339, LM339A, LM339Y, LM2901

QUAD DIFFERENTIAL COMPARATORS

AVAILABLE OPTIONS

PACKAGED DEVICES

T A

V IO max

at 25 ° C

PLASTIC

SOIC

(D, NS) †

PLASTIC

SSOP

(DB) ‡

CERAMIC

CHIP

CARRIER

(FK)

CERAMIC

DIP

(J)

PLASTIC

DIP

(N)

PLASTIC

TSSOP

(PW) ‡

CERAMIC

DUAL

FLATPACK

(W)

C to 70

5 mV

2 mV

LM339D

LM339NS

LM339AD

LM339ANS

LM339DBR

—

LM339N

—

LM339AN

—

LM339PWR

—

–25 ° C to 85 ° C

25 ° Cto85 ° C

5 mV

LM239D

—

LM239N

—

2 mV

LM239AD

LM239AN

–40

C to 125

7 mV

LM2901D

LM2901NS

LM2901DBR

—

LM2901N LM2901PWR

—

–55 ° C to 125 ° C

55 ° Cto125 ° C

5 mV

LM139D

—

LM139FK

LM139J

—

LM139W

2 mV

LM139AD

LM139AFK

LM139AJ

LM139AW

† The D and NS packages are available taped and reeled. Add the suffix R to the device type (e.g., LM339DR).

‡ The DB and PW packages are only available taped and reeled.

schematic (each comparator)

V CC

Current

Regulator

80-

10 m A

IN+

OUT

IN–

GND

All current values shown are nominal.

POST OFFICE BOX 655303

DALLAS, TEXAS 75265

SLCS006E – OCTOBER 1979 – REVISED MAY 2000

•

LM139, LM139A, LM239, LM239A,

LM339, LM339A, LM339Y, LM2901

QUAD DIFFERENTIAL COMPARATORS

SLCS006E – OCTOBER 1979 – REVISED MAY 2000

absolute maximum ratings over operating free-air temperature range (unless otherwise noted) †

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Differential input voltage, V ID (see Note 2)

36 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36 V

Input voltage range, V I (either input)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

–0.3 V to 36 V

Output voltage, V O

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duration of output short circuit to ground (see Note 3)

20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Unlimited

Package thermal impedance,

q JA (see Note 4): D package

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DB package

C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

NS package

C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C/W

PW package

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

113

C/W

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Case temperature for 60 seconds: FK package

See Dissipation Rating Table

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, DB, N, or PW package

260

. . . . . . . .

260

Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: J package

. . . . . . . . . . . . . . . . . . . . .

300

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. All voltage values, except differential voltages, are with respect to network ground.

2. Differential voltages are at IN+ with respect to IN–.

3. Short circuits from outputs to V CC can cause excessive heating and eventual destruction.

4. The package thermal impedance is calculated in accordance with JESD 51.

–65

C to 150

DISSIPATION RATING TABLE

PACKAGE

T A 3 25 ° C

POWER RATING

DERATING

FACTOR

DERATE

ABOVE T A

T A = 70 ° C

POWER RATING

T A = 85 ° C

POWER RATING

T A = 125 ° C

POWER RATING

900 mW

11 mW/ ° C

68 ° C

880 mW

715 mW

275 mW

900 mW

11 mW/ ° C

68 ° C

880 mW

715 mW

275 mW

POST OFFICE BOX 655303

•

DALLAS, TEXAS 75265

Supply voltage, V CC (see Note 1)

Output current, I O

N package

Continuous total dissipation

Storage temperature range, T stg

LM139, LM139A, LM239, LM239A,

LM339, LM339A, LM339Y, LM2901

QUAD DIFFERENTIAL COMPARATORS

electrical characteristics at specified free-air temperature, V CC = 5 V (unless otherwise noted)

LM139

LM139A

PARAMETER

TEST CONDITIONS †

T ‡

UNIT

PARAMETER

T A ‡

UNIT

MIN

TYP MAX

MIN

TYP MAX

V CC = 5 V to 30 V,

V IC =V ICR (min)

25 ° C

V IO

Input offset voltage

V IC = V ICR (min),

V O = 1.4 V

Full range

I IO

Input offset current

V O = 1.4 V

I IO

Full range

100

–25 –100

I IB

Input bias current

V O = 1.4 V

I IB

Full range

–300

0 to

V CC –1.5

0 to

V CC –1.5

Common-mode

V ICR

input-voltage range

0 to

V CC –2

0 to

V CC –2

Full range

A VD

Large-signal

differential-voltage

amplification

V CC ± = ± 7.5 V,

V O = –5 V to 5 V

200

V/mV

High-level output

V OH = 5 V

25 ° C

0.1

I OH

V ID = 1 V

I OH

current

V OH = 30 V Full range

Low-level output

V ID = –1 V,

I OL = 4 mA

25 ° C

150

400

150

400

V OL

V ID =1V I OL =4mA

voltage

Full range

700

I OL

Low-level output

current

V ID = –1 V,

V OL = 1.5 V

25 ° C

I CC

Supply current

(four comparators)

V O = 2.5 V, No load

0.8

† All characteristics are measured with zero common-mode input voltage unless otherwise specified.

‡ Full range (MIN to MAX) for LM139 and LM139A is –55 ° C to 125 ° C. All characteristics are measured with zero common-mode input voltage

unless otherwise specified.

switching characteristics, V CC = 5 V, T A = 25

PARAMETER

TEST CONDITIONS

LM139

LM139A

UNIT

MIN

TYP MAX

R L connected to 5 V through 5.1 k

100-mV input step with 5-mV overdrive

1.3

Response time

m s

C L = 15 pF § , See Note 5

TTL-level input step

0.3

§ C L includes probe and jig capacitance.

NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

POST OFFICE BOX 655303

•

DALLAS, TEXAS 75265

SLCS006E – OCTOBER 1979 – REVISED MAY 2000

TEST CONDITIONS †

Input offset voltage

V IO

Input offset current

V O =14V

Input bias current

V O =14V

V ICR

V ID =1V

V OL

Response time

m s

LM139, LM139A, LM239, LM239A,

LM339, LM339A, LM339Y, LM2901

QUAD DIFFERENTIAL COMPARATORS

SLCS006E – OCTOBER 1979 – REVISED MAY 2000

electrical characteristics at specified free-air temperature, V CC = 5 V (unless otherwise noted)

PARAMETER

TEST CONDITIONS †

T A ‡

LM239

LM339

LM239A

LM339A

UNIT

MIN

TYP MAX

MIN

TYP MAX

V CC = 5 V to 30 V,

V IC =V ICR (min)

V IO

Input offset voltage

V IC = V ICR (min),

V O = 1.4 V

Full range

25 ° C

I IO

Input offset current

V O = 1.4 V

I IO

Full range

150

Input bias current

V O = 1.4 V

25 ° C

–25 –250

I IB

V O =14V

Full range

–400

25 ° C

0 to

V CC –1.5

0 to

V CC –1.5

Common-mode

V ICR

input-voltage range

0 to

V CC –2

0 to

V CC –2

Full range

A VD

Large-signal

differential-voltage

amplification

V CC = 15 V,

V O = 1.4 V to 11.4 V,

R L . 15 k W to V CC

25 ° C

200

V/mV

High-level output

V OH = 5 V

0.1

I OH

V ID = 1 V

I OH

current

V OH = 30 V Full range

m A

Low-level output

150

400

150

400

V OL

V ID =1V I OL =4mA

I OL = 4 mA

V OL

voltage

Full range

700

I OL

Low-level output

current

V ID = –1 V,

V OL = 1.5 V

25 ° C

V O = 2.5 V, No load

0.8

Supply current

(four comparators)

I CC

V CC = 30 V,

No load

V O = 2.5 V,

25 ° C

† All characteristics are measured with zero common-mode input voltage unless otherwise specified.

‡ Full range (MIN to MAX) for LM239 and LM239A is –25 ° C to 85 ° C, for LM339 and LM339A is 0 ° C to 70 ° C. All characteristics are measured with

zero common-mode input voltage unless otherwise specified.

switching characteristics, V CC = 5 V, T A = 25

PARAMETER

TEST CONDITIONS

LM239, LM239A,

LM339, LM339A

UNIT

MIN

TYP MAX

R L connected to 5 V through 5.1 k W ,

100-mV input step with 5-mV overdrive

1.3

Response time

C L = 15 pF § , See Note 5

m s

TTL-level input step

0.3

§ C L includes probe and jig capacitance.

NOTE 5: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.

POST OFFICE BOX 655303

•

DALLAS, TEXAS 75265

Input offset voltage

V IO

Input offset current

V O =14V

Input bias current

I IB

V ID =1V

V ID = –1 V,

Supply current

Response time

m s

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: