HP LaserJet 4600 Service Manual Update.pdf

(52 KB) Pobierz
Microsoft Word - 3451292091846625248
Color
LaserJet
4600
Service Manual Update
The following are updates to the CLJ46 service manual, part number C9660-
90901.
Page 23 – Space Requirements – Add 650mm (2.5 inches) to the depth, if legal
Document Summary
Updates include information that is incorrect or missing in the service
manual.
Author: Deborah Hahn, ICO Technical Marketing
Dt 8N
b 2002
paper is loaded in tray 2 or 3.
Page 146 – Installation tip for Rear Top Cover: When reinstalling the rear top
cover, make sure the fuser is removed. The rear guide on the fuser can be
broken if the rear top cover is installed with the fuser installed.
Page 160 – To remove the multi-purpose tray pickup roller and separation pad
Remove step 5 and replace with the following:
5. Slide a small flatblade screwdriver under the white plastic surrounding the
separation pad and lift up to pop it loose.
Page 184 – Installation tip: Ensure scanners are aligned left to right before
reinstalling the alignment bars. Failure to do so may result in color plane
misregistration.
Page 212 - Add “Bad Optinal Tray Connection” as follows:
BAD OPTIONAL
TRAY CONNECTION
Tray 3 unit is not correctly
installed.
1. Turn printer off then
on again.
2. If the error
continues, turn the
printer of, reinstall
Tray 3 and power
the printer on.
3. If the error persists,
Page 1of 2
77892449.006.png 77892449.007.png
replace tray 3.
Page 235 – Update “Actions” for 13.0A.00 error
13.0A.00 JAM IN TOP
COVER AREA
1
During a duplex print job, media was delayed in the
output bin before it entered the duplex path. OR
During a simplex job, media was delayed in the fuser
before it entered the output bin.
1. Open the top cover.
Warning! The fuser is hot, wait 10 minutes for it to cool
down.
2. Firmly lift the two green handles on either side of
the fuser to disengage the fuser rollers.
3. Ensure the orange fuser shipping locks have been
removed.
4. Pull media by both corners to remove it.
5. Firmly press down on the two green handles on
either side of the fuser to re-engage the fuser
rollers.
Page 312 – Update Part numbers for Supplies
C9720A
C9720-67901
Black print cartridge
C9720-67902
Black print cartridge (Europe)
C9721A
C9721-67901
Cyan print cartridge
C9721-67902
Cyan print cartridge
(Europe)
C9722A
C9722-67901
Yellow print cartridge
C9722-67902
Yellow print cartridge
(Europe)
C9723A
C9723-67901
Magenta print cartridge
C9723-67902
Magenta print cartridge
(Europe)
C9724A
C9660-69004 (exchange)
RG5-6484-000CN (new)
Image transfer kit
C9725A
C9660-69002 (exchange)
RG5-6493-000CN (new)
Image fuser kit (110 volt)
C9726A
C9660-69003 (exchange)
RG5-6517-000CN (new)
Image fuser kit (220 volt)
Page 321 – Update Table 8-6. Split Ref 1 into 1b & 1b, update other parts.
Ref Description Qt
y
Part number
1a Lever, cover
(pictured in
Figure 8-5 as
callout 1, part
on the right)
4
RB2-8196-000CN
Page 2of 2
77892449.008.png 77892449.009.png 77892449.001.png 77892449.002.png 77892449.003.png
1b Lever, cart
pressure
4
RB2-8195-000CN
4
Arm link (right) 1
Not available to order. Order assembly, callout
2, instead.
7
Arm link (left) 1
Not available to order. Order assembly, callout
5, instead.
Page 325 – Update Table 8-8
Ref Description Qt
y
Part number
5
ETB Assembly 1
C9660-69004 (exchange)
RG5-6484-000CN (new)
12 Laser/scanner
assembly
4
RG5-6390-000CN
4
Arm link (right) 1
Not available to order. Order assembly, callout
2, instead.
7
Arm link (left) 1
Not available to order. Order assembly, callout
5, instead.
Page 327 – Callout 14, sensor/bracket assembly does NOT include sensors or
grounding plates. It is the bracket only. If photo-sensors are needed, order
WG8-5362-000CN, quantity 2.
Page 329 – Update Table 8-11
Ref Description
Qty Partnumber
2
Developing drive
assembly
(cyan/magenta)
Developing drive
assembly
(black/yellow)
2
Not available to order. Order assembly,
RG5-6504-000CN, callout #1 instead.
1
1
Not available to order. Order assembly,
RG5-6505-000CN (for black) or RG5-6506-
000CN (for yellow), callout #1 instead.
3
Gear, 30T
1
Not available to order. Order drum drive
assembly for specific color (RG5-6504-
000CN, RG5-6505-000CN, OR RG5-6506-
000CN), callout #1 instead.
5
Cable, main drive 1
Not available to order. Order drum drive
assembly for specific color (RG5-6504-
000CN, RG5-6505-000CN, OR RG5-6506-
000CN), callout #1 instead.
Page 338 –Update part number in Table 8-18
Ref Description
Qty Partnumber
1
Optional 500-
shett paper
feeder and tray 3
assembly
1
C9664-67901
Page 3of 3
77892449.004.png 77892449.005.png
Page 4of 4

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin