XDM-Xterm.pdf
(
59 KB
)
Pobierz
XDM and X Terminal mini-HOWTO
XDM and X Terminal mini−HOWTO
Kevin Taylor
kevin@northants.lug.org.uk
Revision History
Revision v1.00 2002−05−16 Revised by: KT
Minor updates to all sections. Added details of Windows/Linux interoperability. Added section on starting
XDM. Added details of KDM and GDM. Added new software resources.
Revision v0.05
14 November 2000
Revised by: KT
Added cross−references to other Howtos
Revision v0.04
6 November 2000
Revised by: KT
Updates after first public draft.
Revision v0.03
3 July 2000
Revised by: KT
Minor updates from first comments
Revision v0.02
28 June 2000
Revised by: KT
First SGML source draft from HTML source
Revision v0.01
27 June 2000
Revised by: KT
First HTML source draft
This document describes the basic ideas for using XDM to manage X terminals. It is not meant to be a
comprehensive discussion of all the features of XDM, but a gentle introduction to what XDM can do.
For a full discussion about the installation and configuration of X terminals, please refer to the 'Thin−client'
HOWTO, from the Linux Documentation Project or the Linux Terminal Server Project (see
Section 7
).
XDM and X Terminal mini−HOWTO
Table of Contents
1. Introduction.
....................................................................................................................................................1
1.1. Copyright Information.
.....................................................................................................................1
1.2. Disclaimer.
........................................................................................................................................1
1.3. New Versions.
...................................................................................................................................1
1.4. Credits.
..............................................................................................................................................2
1.5. Feedback.
..........................................................................................................................................2
1.6. To do.
................................................................................................................................................2
2. Basic Concepts.
................................................................................................................................................3
2.1. What is covered..
...............................................................................................................................3
2.2. About this document.
........................................................................................................................3
3. XDM.
................................................................................................................................................................5
3.1. What is XDM.
...................................................................................................................................5
3.2. What is an X terminal.
......................................................................................................................5
3.3. Some Terminology.
..........................................................................................................................5
3.4. What can XDM do.
...........................................................................................................................6
3.4.1. XDM accepts queries from X Server.
...............................................................................7
3.4.2. XDM Manages X Server.
.................................................................................................7
4. Configuring XDM.
..........................................................................................................................................9
4.1. Configuration Files.
..........................................................................................................................9
4.2. Configuring XDM to Manage X Servers.
.......................................................................................10
4.3. Configuring XDM to Receive Queries.
..........................................................................................10
4.4. Starting X.
.......................................................................................................................................11
4.5. Starting XDM.
................................................................................................................................12
4.6. The Chooser Application.
...............................................................................................................14
4.7. Alternatives to XDM..
.....................................................................................................................14
5. Advanced Configuration Options.
...............................................................................................................16
5.1. Configuration Sets.
.........................................................................................................................16
5.2. X Resources.
...................................................................................................................................17
6. Common Configurations.
.............................................................................................................................18
6.1. Linux to Linux.
...............................................................................................................................18
6.1.1. Stand−alone X Workstation.
...........................................................................................18
6.1.2. X Terminal and Application Server.
...............................................................................18
6.1.3. Group of Managed X Terminals.
....................................................................................18
6.2. Linux to Other Systems.
.................................................................................................................18
6.2.1. Linux and Solaris.
...........................................................................................................19
6.2.2. Linux and Windows.
.......................................................................................................19
6.3. Other Systems to Linux.
.................................................................................................................19
6.3.1. Solaris and Linux.
...........................................................................................................20
6.3.2. Windows and Linux.
.......................................................................................................20
7. Resources.
......................................................................................................................................................21
i
1. Introduction
1.1. Copyright Information
This document is copyrighted (c) 2000−2002 Kevin Taylor and is distributed under the terms of the Linux
Documentation Project (LDP) license, stated below.
Unless otherwise stated, Linux HOWTO documents are copyrighted by their respective authors. Linux
HOWTO documents may be reproduced and distributed in whole or in part, in any medium physical or
electronic, as long as this copyright notice is retained on all copies. Commercial redistribution is allowed and
encouraged; however, the author would like to be notified of any such distributions.
All translations, derivative works, or aggregate works incorporating any Linux HOWTO documents must be
covered under this copyright notice. That is, you may not produce a derivative work from a HOWTO and
impose additional restrictions on its distribution. Exceptions to these rules may be granted under certain
conditions; please contact the Linux HOWTO coordinator at the address given below.
In short, we wish to promote dissemination of this information through as many channels as possible.
However, we do wish to retain copyright on the HOWTO documents, and would like to be notified of any
plans to redistribute the HOWTOs.
If you have any questions, please contact
<
linux−howto@metalab.unc.edu
>
1.2. Disclaimer
No liability for the contents of this documents can be accepted. Use the concepts, examples and other content
at your own risk. As this is a new edition of this document, there may be errors and inaccuracies, that may of
course be damaging to your system. Proceed with caution, and although this is highly unlikely, the author(s)
do not take any responsibility for that.
All copyrights are held by their by their respective owners, unless specifically noted otherwise. Use of a term
in this document should not be regarded as affecting the validity of any trademark or service mark.
Naming of particular products or brands should not be seen as endorsements.
You are strongly recommended to take a backup of your system before major installation and backups at
regular intervals.
1.3. New Versions
The latest version number of this document may be obtained from
The Northants LUG, UK Project Pages
.
1. Introduction
1
XDM and X Terminal mini−HOWTO
1.4. Credits
Thanks go to the following people for help with information and proof reading of the document.
Scot W Stevenson for the original X terminal mini−howto document, from 1995, on which some of the
material for the section on advanced xdm−config configurations was obtained.
Members of the Northants LUG, UK for proof reading the document.
The writers of the XDM, Xserver man pages and the default XDM scripts.
Credits for 0.05
Everyone who commented on the earlier versions, including Neil Zanella, Rafael Herrera, Paul
Hornshaw, Clive Jones, Robert de Geus, Alex Schenkman, Richard Kaszeta, Malcolm Herbet
Credits for 1.00
The following people provided feedback and comments which have led up to the 1.00 release: Alan
James, Stephen Eglen, Malcolm Hunter, Holgar Hoffman, Patrick Rynhart, Amedeo Lanza,
Alexander Skopalik, Mike Banahan.
1.5. Feedback
Feedback is most certainly welcome for this document. Without your submissions and input, this document
wouldn't exist. Please send your additions, comments and criticisms to the following email address:
<
xdm−mini@northants.lug.org.uk
>
.
1.6. To do
I probably ought to mention some details about the following at some point ...
·
FAQs and common mistakes
Debugging problems with XDM.
·
1.4. Credits
2
2. Basic Concepts
2.1. What is covered
This document describes the basic concepts behind using XDM (the X Display Manager) to manage X
terminals and X servers, in order to provide 'thin−client' computing, using Linux.
X (or the 'X Window System') is the windowing and graphics environment of choice for Unix systems. Its
particular strength (and the key bit that we are interested in for this document) is that it separates the running
applications (web browser, word processor, etc) from the actual graphics screen and input devices (mouse,
keyboard, etc) via a network communications mechanism.
Essentially, this means that you can be running an application on one machine, but have its input and output
redirected to another machine via a network. This is the key feature that makes an X terminal possible.
This document should be treated as a 'getting started with XDM' document, in that it describes the basic terms
and concepts for using XDM and X terminals, with simple examples that provide the minimum amount of
security.
The reader is advised to consult the list of resources provided at the end of the document in order to proceed
beyond these basic facilities − in particular, the configuration of the 'authentication' and security settings
should be examined, as the examples given in this document utilise the least secure modes of operation.
Please note − the majority of the information in this document was obtained from systems running Debian
2.1, SuSE 6.4, Mandrake 7.0 and RedHat 6.0.
This document does not discuss the installation or configuration of a network or X on Linux. Please refer to
the appropriate HOWTO documents from the Linux Documentation Project for details (see
Section 7
).
This document also does not attempt to describe how to install and configure Linux for operation as an X
terminal. For this information, please refer to the 'thin−client' HOWTO document, provided as part of the
Linux Documentation Project, or the Linux Terminal Server Project (see
Section 7
).
2.2. About this document
This document came about because I wanted to experiment with Linux on a 486 PC as an X terminal to my
main Linux box.
After reading the man pages, specifications and current howto documents relating to XDM and X terminals, I
ended up getting really confused about where XDM was supposed to run and confusing XDM servers with X
servers and the like, and so after an evening or two of experimentation, this document was born.
Once the basic terminology has been sorted out, the documentation for XDM and self−documenting sample
files make very good reading − I just could not find a simple introduction to the basic concepts anywhere to
get me started. Hopefully this document could prove to be a suitable introduction to someone in a similar
position to me.
2. Basic Concepts
3
Plik z chomika:
megaskrypty
Inne pliki z tego folderu:
3-Button-Mouse(1).pdf
(58 KB)
XWindow-Overview-HOWTO(1).pdf
(30 KB)
Xterm-Title(1).pdf
(39 KB)
Xterminals(1).pdf
(30 KB)
Xinerama-HOWTO(1).pdf
(33 KB)
Inne foldery tego chomika:
Programowanie
Zgłoś jeśli
naruszono regulamin