SV1000-2000.const(1).pdf

New Concept Connector Type Manifold

Series SV1000 / 2000 / 3000 / 4000

The use of multi-pin connectors to replace wiring

inside manifold blocks provides flexibility when

adding stations or changing manifold configuration.

The SV series employs a multi-connector instead of the conventional lead wires for internal

manifold wiring. By connecting each block with a connector, changes to manifold stations are

greatly simplified.

Connector wiring diagram

For both serial and parallel wiring, additional

manifold blocks are sequentially assigned pins

on the connector.

This makes it completely unnecessary to

disassemble the connector unit.

Connector type

Manifold block

Solenoid

Connector

(D-sub connector, etc.)

4 position dual 3 port

valves available for series

SV1000/2000

• Two 3 port valves built into a single valve body.

• A and B ports can be individually controlled.

• Three combinations are available: [N.C./N.C.],

[N.O./N.O.] and [N.C./N.O.].

• Mixed mounting with 5 port valves is also possible.

• Labels are attached to indicate A and B side functions,

using the same color as the manual override.

Common (+, –)

Station 1 - A side

Station 1 - B side

Station 2 - A side

Station 2 - B side

Station 3 - A side

Substrate for single

Station 3

Substrate for double

Station 2

Substrate for double

Station 1

Cassette base type manifold

(for SV1000/2000)

Cassette base type manifolds offer the ultimate in flexibility.

Manifold sections can be added using a simple release mechanism.

A side manual override: Orange A side passage symbol: Orange

Pull the

lever

forward with

a screw

driver, etc.

B side manual override: Green

B side passage symbol: Green

A side coil

A side spool valve

B side spool valve

Lever

5(EA) port

4(A) port

1(P) port

3(EB) port

B side coil

2(B) port

DIN rail holding screw

Model

A side

B side

JIS symbol

4(A)

2(B)

Loosen the DIN rail holding screws at both

ends, and separate the manifold to the right

and left.

Pull the valve up at the front.

N.C.

valve

N.C.

valve

SV A00

SOL.a

5(EA)

SOL.b

3(EB)

1(P)

4(A)

2(B)

Tie-rod base manifold

(for SV1000/2000/3000/4000)

Conventional tie-rod base type manifolds are also available.

The use of 34 pin connectors allows up to 16 stations with double solenoids.

SV B00

N.O.

valve

N.O.

valve

SOL.a

5(EA)

SOL.b

3(EB)

1(P)

4(A)

2(B)

SV C00

N.C.

valve

N.O.

valve

SOL.a

5(EA)

SOL.b

3(EB)

1(P)

External pilot specification is not available for 4 position

dual 3 port valves.

Features 1

New Concept

NEW Serial options:

Accommodates gateway type serial wiring

Series SV

Series EX500 gateway features:

• IP65 protection

• 128 I/O (64 inputs, 64 outputs)

• Controls up to 4 branches with 32 I/O

per branch

• A single cable from the gateway

provides both signal and power for each

branch, eliminating the need for

separate power connections for each

manifold.

Series EX250 features:

Serial wiring with I/O unit Series EX250

• IP65 protection

• 64 I/O (32 inputs, 32 outputs)

• Double solenoid allows up to 16 stations

(up to 32 solenoids).

Product is CE compliant

Service life of

50 million cycles or more

(Based on SMC life

test conditions)

Power consumption: 0.6W

(Current: 25mA, 24VDC)

Increased moisture and dust

resistance

• Manifolds conform to IP65 ∗ and IP67 ∗ for

protection from dust and moisture.

(Based on IEC529 ∗ .)

(Refer to the catalog contents for details, as some types of

connectors do not meet these standards.)

A relay output module is

available for control of devices

up to 110VAC, 3A.

Features 2

Series SV

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: