NIMIC01GBBTR1.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01

www.cobra.it

NISSAN

MOD. MICRA* YEAR. 01 ﬁ

PETROL

DIESEL

MAKE

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment. Pass the

cables using the original core hitch located in the bulkhead that divides the engine

compartment and the passenger’s compartment, near the front window.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard, driver’s side.

POWER SUPPLY

+ 30: connect to the 2 mm 2 WHITE/GREEN wire located in the wiring harness coming

out of the TLC operating central placed under the dashboard, driver’s side

- 31: connect directly to the 2 mm 2 BLACK wire located in the wiring harness coming

out of the TLC operating central placed under the dashboard, driver’s side.

IGNITION WIRE

+ 15/54: connect to the 2 mm 2 WHITE/RED wire located in the wiring harness coming

out of the TLC operating central placed under the dashboard, driver’s side.

DIRECTION INDICATORS

Connect to the GREEN/YELLOW wire with SILVER reference and to the

GREEN/BLACK wire with SILVER reference located in the wiring harness coming out

of the TLC operating central placed under the dashboard, driver’s side.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the RED/BLUE wire.

Front window, passenger’s side:

cut the BLUE/RED wire

Connections must be done in the wiring harness coming out of the correspondent

control switch.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

38XX Vehicle Position

GREY/BLACK ground car body

YELLOW/BLACK ground car body

VIOLET/WHITE ground car body

ORANGE GREEN/YELLOW (BLK) coming out TLC central

VIOLET GREEN/BLACK (BLK) coming out TLC central

ORANGE/WHITE ground car body

Connections must be done directly in the connector coming out of the TLC central

located on the left of the central doors locking unit on the side of the steering column,

driver’s side. Refer to diagram nr. 125.

IMMOBILISATION POINT

Fuel pump

Cut the BLACK/RED wire with SILVER reference located in the wiring harness behind

the sill cover, driver’s side.

STARTER CUT OFF

+ 50: Cut the BLACK/RED wire located in the wiring harness coming out of the grey

connector, placed near the core hitch, on the coming out of the driver’s side door.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the RED/GREEN wire located in the wiring harness coming out of the TLC

operating central placed under the dashboard, driver’s side.

BOOT SWITCH

Connect to the RED/BLUE wire located in the wiring harness coming out of the

connector of the boot lamp

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

nimic01gbbtr1.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01

www.cobra.it

FITTING DIAGRAM N° 125

To make the connection of Art. 3800 on

NISSAN MICRA

Central doors locking unit

ART.3800 GREEN/YELLOW GREEN/BLACK

VIOLET

ORANGE

DIODES 1N5406

YE YELLOW

YELLOW

ORANGE/WHITE

VIOLET/WHITE

GREY/BLACK

YELLOW/BLACK

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

nimic01gbbtr1.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: