************************************************* Release Notes for Vigor3200 series Firmware Version : 3.3.7.2 (formal release) Release Date : 6th Aug, 2012 Build Date : 17th July, 2012 Applied Models : Vigor3200 Locale : UK / Ireland ************************************************* [New Features] 1. Support Common E-mail / Send Syslog via email. 2. Support hardware MD5/SHA1 encryption. 3. Allow Mail Alert to send emails with VPN notifications. 4. Support IP Address assignment for LAN2/3/4 subnet for dial-in users 5. Support System Maintenance > Login Customization. 6. Support three different LDAP binding methods (simple, anonymous and regular). 7. Support group configuration for SSL VPN. With this, you may specify and detail the applications and the authentication methods for different groups of user accounts. 8. Support LDAP over SSL connection (LDAPs). It will secure LDAP communication with an SSL tunnel. 9. Support multiple profiles for LDAP/AD. The administrator may use them for binding different groups of users (for example, staff from different departments). [Improvement] 1. Improved: Safari browser doesn?t work with user management. 2. Improved: Support browsing LDAP/AD tree and entries. 3. Improved: Add new DDNS providers (UBDdns, Oray, and Peanut Shell ) 4. Improved: Support ZTE MF190J modem. 5. Improved: Improve VPN Profile web user interface. 6. Improved: Support RADIUS parameters setting for TR-069. 7. Improved: Support Maintenance >> SysLog / Mail Alert Setup parameters setting for TR-069. 8. Improved: Modify the default pool size of LAN DHCP server from 50 to 150. 9. Improved: Add a "Protocol" column in NAT >> Port Redirection page. 10. Improved: DHCP table shows many additional DHCP entries when LAN subnet mask is changed. 11. Improved: The SNMP server only reports details for WAN1 & 2. 12. Improved: Modify some SNMP information for LAN status. 13. Improved: Add a new telnet command "srv dhcp custom_option" which allows a user to enter user-defined DHCP option. 14. Improved: Support disable/enable user mode on WUI. The factory default setting is disabled. 15. Improved: Improve the compatibility with VigorACS SI v1.08 16. Corrected: PPPoE WAN with VLAN did not work. 17. Corrected: The system coulnd't determine which LAN subnet shall be regarded as the static route in LAN>>Static route, if there are three LAN Subnets configured and VLAN1 is enabled. 18. Corrected: Only 20 port redirection rules would work simultaneously 19. Corrected: The index 21~40 for Open Ports did not work. 20. Corrected: telnet command was not able to add more than 20 port redirections. 21. Corrected: Schedule setting does not work for WAN3/WAN4. 22. Corrected: Data Flow Monitor WAN sessions does not display values. 23. Corrected: Data Flow Monitor shows incorrect Session Limit value. 24. Corrected: WAN status shows ?down? when the WAN connection detection is set as "ping detection". 25. Corrected: The WAN load-balance failover can not work well when there are more than three WANs. 26. Corrected: QoS function does not sort in correct service type. 27. Corrected: The user can not access Vigor3200 (http, https) through DMZ port when he disables 802.1q on LAN. 28. Corrected: DHCP for DMZ port can not assign IP to stations when 802.1q is enabled. 29. Corrected: The bandwidth limit for DMZ range can not be set. 30. Corrected: The session limit for DMZ host can not be set. 31. Corrected: PCs in VLAN1/VLAN2 cannot login Vigor3200's Web UI but can use Telnet to configure the router. 32. Corrected: User-Based mode of user management does not work if HTTPS management port has been changed. 33. Corrected: WAN cannot get IP from DHCP server when Block Fraggle Attack is checked in Firewall>>DoS Defense. 34. Corrected: Firewall can not block internal routing subnet packets. 35. Corrected: When authenticated by RADIUS server with options MS-CHAP and MPPE encryption, the router does not get the session key. 36. Corrected: VPN assigns wrong IP when the subnet is smaller than /24 and the DHCP server is disabled. 37. Corrected: Cannot login web user interface successfully through VPN tunnel (but it works through Telnet). 38. Corrected: Ping detection would be failed when target IP and gateway are in the same subnet. 39. Corrected: RIP over VPN does not work. 40. Corrected: My WAN IP setting does not work for PPTP in VPN NAT mode. 41. Corrected: Buffer leakage occurs when IPSec Aggressive mode is used and set with local IP address. 42. Corrected: VigorPhone350 can not be registered behind NAT after one or two weeks later. 43. Corrected: When HTTPS is disabled for User Management (with port setting 443 for HTTPS, port setting 443 for SSL VPN), the PC in WAN cannot use Smart VPN Client utility to build SSL Tunnel. 44. Corrected: An URL block profile is created with keyword object ?example.com?. However, the Syslog still displays http://example.com when a user visits https://example.com after enabling Syslog. 45. Corrected: Remove "Ultrasurf" from WUI. 46. Corrected: URL Content filter only sporadically blocks the configured file extension. 47. Corrected: When using URL CF (e.g. keyword object is set as ?A?) then other website could also be blocked. 48. Corrected: Online Status shows wrong value for Secondary DNS. 49. Corrected: Always shows LAN1 while any static route for LAN2/3/4 is set. 50. Corrected: FTP in active mode data plan doesn't work well when the user management is enabled. ************************************************* Release Notes for Vigor3200 series Firmware Version : 3.3.7 Release Date : 24th March, 2010 Build Date : 10th March, 2009 Applied Models : Vigor3200 Locale : UK / Ireland ************************************************* [Introduction] The Vigor3200 series is a quad WAN router and firewall. [Notes] [New Features] 1. Support SSL VPN with up to 10 VPN tunnels. 2. Support VPN Backup and Load Balance (VPN Trunking) for WAN1 and WAN2. 3. Support Multi-Certificate. 4. Support LDAP / Active Directory. 5. Add Support for additional 3G modems 6. Increase number for NAT >> Port Redirection from 20 to 40. 7. Increase number for NAT >> Open Ports from 20 to 40. 8. Increase number for WAN >> Load Balance Policy from 20 to 32. 9. Add Reset Default for 3G configuration page. [Improvements] 1. Corrected: RX packets from PPTP LAN to LAN were not counted. 2. Corrected: Telnet command "ipf view" doesn't work. 3. Corrected: May set incorrect WAN IP address for DDNS registrar packet. 4. Corrected: QoS classification error for PPTP RX (receiving) traffic. 5. Improved: Modify description of Service Activation Wizard page. 6, Improved: Modify 3G Modem Dial String Comment. 7. Improved: Remove Enable checkbox in Block Anonymous, Block unknown domain and Block IP address page. 8. Improved: Change Port Trigger description to Port Triggering for NAT pages. [End of File]
TirNaNog