Routing Client Configuration.pdf

MikroTik Routing Client Configuration

Example Configuration

1) Set up the ip addresses

Click on IP -> Addresses

Click on the red + sign to add an ip address

Page 1

Enter the address in the format aaa.bbb.ccc.ddd /nn where /nn is the subnet

mask. i.e. 192.168.1.1/24 = ip address 192.168.1.1, subnet 255.255.255.0.

Ensure the interface is ether1, then click on ok

Repeat to add an ip address for the WLAN1 interface

Page 2

Page 3

2) Setup the wireless interface

Click on wireless

Select WLAN1 and enable it by clicking on the blue tick icon

Double click on the interface to edit it’s details

Select the wireless tab

Select the frequency band from the frequency drop down list

Page 4

Click on apply (IMPORTANT!)

Click on scan and then click on start to discover networks in range

Select the required network, click on connect and then click on close

Click on ok to save changes

An ‘R’ will appear beside the interface to show that it is connected and

Running.

Page 5