MagicSwitchProV3Installation.pdf

Installation of Magic Switch Pro V3

Note:

1. You only need to install one of Tool C, Tool D and Tool E. Do not install all of them.

2. Try Tool E first, since it doesn’t require open the console and void the warranty.

3. Tool D is designed for the latest model of PS2 Slimline, such as Ceramic White and Satin

Silver.

Installation of Tool A:

Stick Tool A in the hole over the ON/RESET button of the console.

Installation of Tool B

Move the disc break to right and hold it. Stick Tool B to the left side of the disc break.

Installation of Tool C

Put Tool C straightly into the hole where the spring is.

Installation of Tool D

Unscrew the case of PS2 Slim.

Open the case.

Find the micro switch which is near the Lens.

Put the Tool D on the switch like the photo shown above. Then, you can re-attach the case to

the console. Next, you can install the Tool A and Tool B. You can refer to the pictures below to

install the Tool A and Tool B

Installation of Tool E

Put a disc into the console, push the ON/RESET button and insert Tool E. Release the

ON/RESET button, if Tool C is installed correctly, the disc automatically rotates. Adjust the

position a little bit to left or right if the disc doesn’t rotate.