ArchiCAD Step 2 _ Annotatio...pdf

(858 KB) Pobierz
ArchiCAD Step 2 : Annotatio...
Step 2 : Annotation and Data Extraction
A - Creating Sections & Elevations
Sections and Elevations (S/E) are both 2D views on the 3D model. They use the same tool in ArchiCAD. The nice thing about the Virtual Building
is the fact you can slice the 3D model to generate 2D drawings. This is fast and accurate and it will be correctly updated when the building model
changes. Moreover, when you open a Section or Elevation window in ArchiCAD, you can still edit the objects. Editing a door in the section
correctly updates the door in the full building model. This is extremely important and is one of the main advantages of using Building Information
Modeling.
S/E Tool
To create a section or an elevation, simply draw the section in the 2D Window using the S/E tool. You can draw the section line by clicking
start and end point in the plan view. Then you need to point to the view direction (the eye cursor). You can adjust this at any time.
Open the actual section view by rightclicking the section line or using the navigator (which is explained in more detail in step 3). In this 2D
view, you can select any object and access its settings. You can move objects, which is usefull to correctly position beams and windows
vertically.
By default, any S/E is linked to the full model, so reopening or refreshing the window updates it. This can take a while for larger projects and
it can be turned off if required, but unless you have a very good reason to do this, avoid breaking the link with the Virtual Building (or be
prepared to go back to the days of 2D drafting and making sure both drawings are correct).
You should try to model as much as possible in the full 3D model, but some things are easier to "fix" in 2D. When you don't need a full 3D
car, tree or person, you can as easily place 2D drawing objects in the section view to speed things up. But the primary use for S/E windows
is annotation: place reference dimensions, especially for all vertical elements that aren't easy to indicate in the 2D plan view.
274991947.008.png 274991947.009.png
The S/E Object has additional settings to define how the section will be generated. This includes line types to distinguish between elements
that are further off then others.
General
You can define an ID (short text) and a name (long text) to identify the section, which is necessary to give section drawings their title
automatically.
A section can be infinite or limited or even zero depth and can be limited vertically. A section is thus a cross-section of the geometry
and additional projection of the geometry on the view side of the section line. An elevation simply doesn't section the building (although it
might cut through the terrain or the surroundings).
Floor Plan (with line type, arrows and marker setings)
A section has a marker , which is a parametric GDL object and can be adjusted or even created from scratch to follow office layout. This
is further specified in the Marker and the Section Marker Styles rollup.
Sections and Elevations will usually use a different marker, but you can use them as you please.
Cut Elements define if the fill and pen will use the objects' settings or the section settings.
Model Effects can optionally activate additional display options for the projected model.
Fill Uncut Surfaces with Elements' Own Materials allows you to get a coloured S/E, which greatly increases the readability of a S/E,
especially for coloured plots.
Vectorial 3D Hatching adds the hatching on 3D objects, such as the brick pattern (which can take a long time to generate for complex
models)
Vectorial Sun Shadows adds a hatched polygon to show the shadow on the projected model (which greatly improves the legibility of
the S/E view)
Story Levels in Section will set the look and functionality of Story Levels , which allows you to graphically interact with the Story Levels in a S/E
window. You can turn it off, if you don't like their appearance and, frankly, the text layout has some serious alignment issues... Right-click in the
S/E window to access the options to edit them interactively.
With the following options, you can display the same S/E in a different way, without changing anything to the building model.
274991947.010.png 274991947.011.png
The editing in S/E Windows will be mostly adding text and dimensions and to verify and adjust the vertical position of elements.
Beware! The section above is usable, but is not a correct structural section through the building! It requires
some (serious) adjustments.
Which strategy to follow for the creation of correct sections
While this overview is not meant to teach construction detailing, you must not forget that you are still being trained as an architect and as an
engineer. The first steps might seem simple, but to create a correct section, additional care has to be taken...
The following picture illustrates a very common problem, for which students often fail to produce a correct solution.
274991947.001.png 274991947.002.png 274991947.003.png
The left side of this picture is what ArchiCAD produces by default when a floor and a wall intersect. The right side is what we have to create,
as an architect (and which is simulated in Photoshop). Unfortunately, this is a limitation in the software . At the time of writing it has not
been resolved, even though it was reported during the beta-test phases of ArchiCAD 11 and 12.
While the software provides an option to define priorities for the different skins in a composite structure, they are ignored with floors. This
output is unacceptable for our purposes (and will be checked in the assignment). There are a few scenarios to manage it; "workarounds" if
you wish.
Strategy 1: create everything separately
In older versions of ArchiCAD, walls were only visible on their home story. The common goal to create structurally correct building
models forced many users to create the outer and inner layers of a cavity wall as separate elements and to split up floors into separate
elements for finishing and core structure.
Advantages:
model exactly how you would build
clean sections without additional drawing work
stable
Disadvantages:
windows and doors are split into the frame and interior sill and another (empty) element with the opening, sill and header for the
outer leaf. This makes the default libraries almost unusable.
more modeling work. Changes are less easy to perform.
Strategy 2: use composite walls and composite floors
To make easier use of the Windows and Doors, we need to insert them into composite walls.
Advantages:
less modeling then with the first option
reuse all Door & Window objects as is
Disadvantages:
Required to use additional 2D drawing or Solid Element Operations or additional Beam Elements to create a correct section
For this example, one would have to draw the floor to the inner side of the wall and add a beam for the overlapping part, since beams
do cut holes in walls. When the beam uses the same material as the Core skin of the floor, they will be merged in a section.
Strategy 3: use composite walls, but still split the floors.
Here, the floors are still created as separate layers. This is, in our opinion, the best strategy.
Advantages:
less modeling then with the first option
reuse all Door & Window objects as is
Possible to create an (almost) correct section without any other action in the Section View
Disadvantages:
play with display order in the Section view to correctly let the floor stay on top of the walls.
More modeling then the second option
So how should correct sections be displayed then?
To summarize, the following picture shows you how the section should look. By default, ArchiCAD will display the picture in the middle. This
is not acceptable!
274991947.004.png 274991947.005.png 274991947.006.png
The left picture displays the section from a preliminary design phase. No need to display composite structures at a scale of 1:200 or even
1:100. Use the Model View Options to turn of the display of the layers in these composites.
The right side displays how the section should look at a more detailed phase: construction design, with scales from 1:100 down to 1:20. Use
the methods discussed above, to split up the floor structure and possibly use SEO to cut out the overlap between structural floor and wall.
3D Document (r12)
Since release 12, ArchiCAD includes the 3D Document. this is a new representation type, being a combination of the 3D Window and the 2D
Window. It is for the most part similar to a 2D Window such as the Section or Elevation window, since it derives from the 3D model to
generate a 2D Representation. You can use all normal annotation tools, such as text and dimensions.
However, it uses a 3D Viewpoint, rather than a top or frontal view, which allows it to show perspective or axonometric drawings.
And in contrast with the 3D Window, composite structures and surface hatching are visible. If you combine this with proper Marquee
sections, you can create 3D details or construction drawings. Dimensions are aligned to the geometry.
You can not orbit around the model, but you can regenerate the view at any time and even redefine the viewpoint.
This works also nicely with the Partial Structure Display.
274991947.007.png
Zgłoś jeśli naruszono regulamin