DWL-G700AP_QIG_en_Quick-Install-2.00[1].pdf
(
1145 KB
)
Pobierz
DWL-G700AP_QIG_en.indd
This product can be set
up using any current web
browser, i.e., Internet
Explorer 6 or Netscape
Navigator 7 and above.
DWL-G700AP
D-Link AirPlus
TM
G
802.11g Wireless
Access Point
Before You Begin
It’s best to use a computer (with an Ethernet adapter) that is connected to a switch
for configuring the DWL-G700AP. The default IP address for the DWL-G700AP is
192.168.0.50
with a Subnet Mask of
255.255.255.0
. You will need to assign your
computer a Static IP address within the same range as the DWL-G700AP’s IP address
for the purpose of configuring the DWL-G700AP.
See the Appendix if you need
assistance in assigning a Static IP address for your network adapter.
Check Your Package Contents
DWL-G700AP 802.11g Wireless
Access Point
CD-ROM (containing Manual and
Warranty)
Ethernet (CAT5 UTP) Cable
7.5V 1.0A DC Power Adapter
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
If any of the above items are missing, please contact your reseller.
©2004, 2005 D-Link Corporation. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
Software and specifications subject to change without notice.
1
Connecting the DWL-G700AP Wireless
Access Point to Your Network
A.
First, connect the power adapter to the
receptor
at the back panel of the
DWL-G700AP and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn
ON
to indicate proper operation.
B.
Insert one end of the cable to the
Ethernet port
on the back panel of the
DWL-G700AP and the other end of the cable to an
Ethernet Broadband Router
(i.e., D-Link DI-604) or
Switch
(i.e., D-Link DES-1005D).
Note
: You also have the
option of connecting the DWL-G700AP directly to the computer that will be used
for configuration. The Link LED light will illuminate to indicate a proper Ethernet
connection.
(
Note
: The Ethernet Port on the DWL-G700AP is Auto-MDI/MDIX.
Meaning you can use a straight-through or crossover-Ethernet cable to connect to
the Ethernet port on the DWL-G700AP.)
C.
The DWL-G630 AirPlus G Wireless Cardbus Adapter and the DWL-G510
AirPlus G Wireless PCI Adapter will connect, out of the box , with the
DWL-G700AP, using their default wireless settings. Computers with 802.11b/g
wireless adapters can also connect to the DWL-G700AP.
C.
Antennas
Used to
wirelessly connect to
802.11b/g adapters.
B.
LAN PORT
for
connecting the access
point to a switch on the
local network with an
ethernet cable
Reset Button
Pressing this button restores
the Access Point to its original
factory default settings.
A.
Receptor for
Power Adapter.
2
When you have
completed the steps in
this
Quick Installation
Guide,
your connected
network should look
similar to this:
Using the Setup Wizard
Open your Web
browser
and type
“http://192.168.0.50”
into the URL address
box. Then press the
Enter
or
Return
key.
The logon pop-up
screen will appear.
Type
“admin”
for th
e
username and leave
the password field
blank.
Click
OK
3
Using The Setup Wizard (continued)
Once you have
logged in, the
Home
screen will appear.
Click
Run Wizard
You will see the following
screens.
Click
Next
4
Using The Setup Wizard (continued)
Step 1
-
Set up your new
password
. You have the option
to establish a password.
Click
Next
Step 2
-
Wireless Setup
The default wireless
settings are:
SSID =
default
Channel =
6
You can change these
settings to match an
existing wireless network.
Click
Next
5
Plik z chomika:
figur1
Inne pliki z tego folderu:
DI-514_qig_en_Quick-Install.pdf
(2901 KB)
DWL-G700AP_QIG_en_Quick-Install-2.00[1].pdf
(1145 KB)
DI-514_QIG_txt_pl.doc
(101 KB)
di514_QIG_103[1].pdf
(2899 KB)
Inne foldery tego chomika:
_Mierniki
_RÓŻNE
_SAMOCHODY
4NSYS
Asmax
Zgłoś jeśli
naruszono regulamin