1a Korg Trinity Manual - Parameter Guide Book.pdf

(1531 KB) Pobierz
TRINITY update(E)
E
5
505290204.008.png 505290204.009.png
INSTRUCTIONS PERTAINING TO A RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING
—When using electric products, basic precautions should always be followed, including the following:
1) Read all the instructions before using the
product.
2) Do not use this product near water—for example,
near a bathtub, washbowl, kitchen sink, in a wet
basement, or near a swimming pool, or the like.
3) This product should be used only with a cart or
stand that is recommended by the manufacturer.
4) This product, either alone or in combination with
an amplifier and headphones or speakers, may
be capable of producing sound levels that could
cause permanent hearing loss. Do not operate
for a long period of time at a high volume level or
at a level that is uncomfortable. If you experience
any hearing loss or ringing in the ears, you
should consult an audiologist.
5) The product should be located so that its location
or position does not interfere with its proper
ventilation.
6) The product should be located away from heat
sources such as radiators, heat registers, or
other products that produce heat.
7) The product should be connected to a power
supply only of the type described in the operating
instructions or as marked on the product.
8) The power-supply cord of the product should be
unplugged from the outlet when left unused for a
long period of time.
9) Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure
through openings.
10) The product should be serviced by qualified
service personnel when:
a) The power-supply cord or the plug has been
damaged; or
b) Objects have fallen, or liquid has been spilled
onto the product; or
c) The product has been exposed to rain; or
d) The product does not appear to operate
normally or exhibits a marked change in
performance; or
e) The product has been dropped, or the
enclosure damaged.
11) Do not attempt to service the product beyond that
described in the user-maintenance instructions.
All other servicing should be referred to qualified
service personnel.
SAVE THESE INSTRUCTIONS
The lightning flash with arrowhead
symbol within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the product.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding provides a path
of least resistance for electric current to reduce the risk of electric shock. This product is equipped
with a cord having an equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
—Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether
the product is properly grounded. Do not modify the plug provided with the product—if it will not fit
the outlet, have a proper outlet installed by a qualified electrician.
i
DANGER
505290204.010.png 505290204.011.png 505290204.001.png
THE FCC REGULATION WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modification to this system can void the user’s authority to operate this equipment.
CE mark for European Harmonized Standards
CE mark which is attached to our company’s products of AC mains operated apparatus until December 31,
1996 means it conforms to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC).
And, CE mark which is attached after January 1, 1997 means it conforms to EMC Directive (89/336/EEC), CE
mark Directive (93/68/EEC) and Low Voltage Directive (73/23/EEC).
Also, CE mark which is attached to our company’s products of Battery operated apparatus means it conforms
to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC).
IMPORTANT NOTICE FOR THE UNITED KINGDOM
WARNING—THIS APPARATUS MUST BE EARTHED
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug,proceed as follows:
• the wire which is coloured green and yellow must be connected to the terminal in the plug which is marked
with the letter E or by the earth symbol , or coloured green or green and yellow.
• the wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
• the wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
Back-up Battery
The TRINITY uses a back-up battery to prevent memory loss when the power is turned off. If the display
shows “Battery Low”, the battery should be replaced. Consult the nearest Korg Service Center or dealer.
TRINITY Series Precaution
Data in memory may sometimes be lost due to incorrect user action. Be sure to save important data to
floppy disk.
Korg will not be responsible for damages caused by data loss.
Trademarks
MS-DOS is a registered trademark of Microsoft Corporation.
All trademarks or registered trademarks are the property of their respective holders.
ii
505290204.002.png
About the TRINITY’s manuals
About the TRINITY’s manuals
How the TRINITY’s manuals are organized and how to
use them
This page explains the contents of each manual, and how to use them. First you should read the
, and learn the basic ideas and procedures that you need to know.
These manuals assume that you have a basic knowledge of synthesizers and MIDI.
The
TRINITY’s manuals
discusses the
TRINITY
,
TRINITY V3
,
TRINITY V3 pro
, and
TRINITY
. If the Solo synthesizer option is installed in your instrument, read any references to
“bank M” as “bank S.”
* In the TRINITY’s manuals, parameter names, values are merely examples and may not always match the
actual display you are working on.
Basic Guide
” explains each item on the front and rear panels, how to make connections, basic opera-
tion, and how each mode operates.
STEP 1
STEP 2
” explains the basics of playing the
TRINITY
(selecting sounds, playing the demo songs,
” explains the basics you need to know before editing your own sounds.
Other information on troubleshooting and MIDI is also provided.
STEP 3
explains the basics of
operation. To take full advantage of the TRINITY, you will need to thoroughly understand the
contents of the B
STEP 2
, read
STEP 3
as necessary. The
Basic Guide
, and then get plenty of hands-on experience, operating the TRINITY
to learn for yourself how the sounds change.
asic Guide
Parameter Guide
The Parameter Guide explains the operation, settings, and points that you need to be aware of for
each parameter, organized by the tab pages of each mode.
Refer to this guide when an unfamiliar parameter appears, or when you want to learn about the
functions of the
TRINITY series
in more detail.
Effect Guide
For each of the effects, this guidebook explains the parameter settings and points that you need to
be aware of.
Refer to the Effect Guide when an unfamiliar parameter appears, or when you want to learn about
the function of the selected effect in more detail.
MOSS-TRI DSP Synthesizer Guide
This explains the setting and operation of the
bank M
program parameters on the
TRINITY V3
,
TRINITY V3 pro
and
TRINITY V3 proX
, organized by each tab page.
Solo Synthesizer Guide
This explains the setting and operation of the
bank S
program parameters on the
TRINITY V3
,
TRINITY V3 pro
and
TRINITY V3 proX
, organized by each tab page.
Voice Name List, Voice Name List for V3
This contains name lists of the preloaded (factory preset) combinations, programs, multi-samples,
and drum samples.
Refer to these lists when you wish to see a list of the preloaded sounds.
iii
Basic Guide
V3 proX
and convenient performance functions).
After you finish reading
505290204.003.png 505290204.004.png 505290204.005.png
How to use this Parameter Guide
How to use this Parameter Guide
The explanatory material in this manual is formatted as follows.
(Example)
• Other symbols used in this manual
This symbol appears at the left of explanatory material related to MIDI.
This mark appears at the right of the parameter name for parameters which can be
selected as a source for Alternate Modulation.
• In this manual, “CC#” is an abbreviation of Control Change Number.
• Numbers related to MIDI messages in square brackets [ ] are in hexadecimal notation.
iv
505290204.006.png 505290204.007.png
Zgłoś jeśli naruszono regulamin