Podstawy_160_PL.pdf
(
852 KB
)
Pobierz
untitled
Tekla Structures
Podstawy Tekla Structures
Wersja produktu 16.0
Grudzień 2009
© 2010 Tekla Corporation
© 2010 Tekla Corporation and its licensors. All rights reserved.
This Software Manual has been developed for use with the referenced Software. Use of the Software, and use of this
Software Manual are governed by a License Agreement. Among other provisions, the License Agreement sets certain
warranties for the Software and this Manual, disclaims other warranties, limits recoverable damages, defines
permitted uses of the Software, and determines whether you are an authorized user of the Software. All information
set forth in this manual is provided with the warranty set forth in the License Agreement. Please refer to the License
Agreement for important obligations and applicable limitations and restrictions on your rights. Tekla does not
guarantee that the text is free of technical inaccuracies or typographical errors. Tekla reserves the right to make
changes and additions to this manual due to changes in the software or otherwise.
In addition, this Software Manual is protected by copyright law and by international treaties. Unauthorized
reproduction, display, modification, or distribution of this Manual, or any portion of it, may result in severe civil and
criminal penalties, and will be prosecuted to the full extent permitted by law.
Tekla, Tekla Structures, Xcity, Xengineer, Xpipe, Xroad, Xpower, Xsteel, and Xstreet are either registered trademarks
or trademarks of Tekla Corporation in the European Union, the United States, and/or other countries. Other product
and company names mentioned in this Manual are or may be trademarks of their respective owners. By referring to a
third-party product or brand, Tekla does not intend to suggest an affiliation with or endorsement by such third party
and disclaims any such affiliation or endorsement, except where otherwise expressly stated.
Portions of this software:
D-Cubed 2D DCM © 2008 Siemens Product Lifecycle Management Software III (GB) Ltd. All rights reserved.
EPM toolkit © 1995-2004 EPM Technology a.s., Oslo, Norway. All rights reserved.
XML parser © 1999 The Apache Software Foundation. All rights reserved.
Project Data Control Library © 2006 - 2007 DlhSoft. All rights reserved.
DWGdirect, DGNdirect and OpenDWG Toolkit/Viewkit libraries © 1998-2005 Open Design Alliance. All rights
reserved.
FlexNet Copyright © 2006 Flexera Software Limited. All Rights Reserved. This product contains proprietary and
confidential technology provided by and owned by Flexera Software Limited Of Schaumburg, IL, USA. Any use,
copying, publication, distribution, display, modification, or transmission of such technology in whole or in part in any
form or by any means without the prior express written permission of Flexera Software Limited is strictly prohibited.
Except where expressly provided by Flexera Software Limited in writing, possession of this technology shall not be
construed to confer any license or rights under any of Flexera Software´s intellectual property rights, whether by
estoppel, implication, or otherwise.
The software is protected by U.S. Patent 7,302,368. Also elements of the software described in this Manual may be
the subject of pending patent applications in the European Union and/or other countries including U.S. patent
applications 2004031231, 2004267695, 2005285881, 2006000484 and 200613639.
Konwencje użyte w tym podręczniku
Konwencje
typograficzne
W tym podręczniku zostały użyte następujące konwencje typograficzne:
Czcionka
Użycie
Pogrubienie
Każdy tekst użyty w interfejsie użytkownika jest
Pogrubiony
. Jest
to używane dla, na przykład, nazw okien, pól i przycisków.
Pogrubiona
kursywa
Nowe pojęcia są pisane
pogrubioną kursywą
gdy po raz pierwszy
pojawiają się w bieżącym kontekście.
Monospace
Fragmenty kodu programu, HTML, lub innych materiałów, które
normalnie edytuje się w edytorze tekstu, pojawiają się w czcionce
monospace
.
Ten typ czcionki jest także używany dla nazw plików i ścieżek do
folderów, oraz dowolnego tekstu, który będziesz musiał osobiście
wpisać.
Ramki
W tym podręczniku używane są następujące typy ramek informacyjnych:
Wskazówka
może proponować skrót, lub sugerować alternatywne
metody i rozwiązania.
Notatka
zwraca uwagę na detale, które możesz łatwo przeoczyć. Może
także skierować cię w inne miejsce tego podręcznika, które możesz
uznać za przydatne.
Zawsze powinieneś czytać
ważne informacje i ostrzeżenia
, takie jak ta.
Pomogą ci uniknąć poważnych pomyłek i oszczędzić czas.
Ten symbol oznacza
zaawansowane lub bardzo techniczne
informacje
, która zazwyczaj interesuje technicznie zorientowanych
czytelników.
TEKLA STRUCTURES 16
3
Spis treści
Konwencje użyte w tym podręczniku .................................................................................................3
1
O Tekla Structures ......................................................................... 11
1.1 Główne cechy ......................................................................................................................... 11
1.2 Konfiguracje........................................................................................................................... 12
Jakiej konfiguracji używam?.............................................................................................. 12
1.3 Role ........................................................................................................................................ 13
1.4 Języki...................................................................................................................................... 13
Zmiana języka interfejsu użytkownika .............................................................................. 14
1.5 Środowiska ............................................................................................................................. 14
1.6 Tryb pojedynczego użytkownika a tryb wielu użytkowników .............................................. 15
2
Przegląd Interfejsu ......................................................................... 17
2.1 Uruchamianie Tekla Structures .............................................................................................. 17
2.2 Zamykanie Tekla Structures................................................................................................... 18
2.3 Paski narzędzi......................................................................................................................... 18
Przenoszenia paska narzędzi .............................................................................................. 18
2.4 Minipasek Narzędzi................................................................................................................ 19
Dostosowywanie Minipaska Narzędzi ............................................................................... 19
2.5 Okna dialogowe...................................................................................................................... 20
Elementy okna dialogowego .............................................................................................. 20
Zakładki.............................................................................................................................. 21
Standardowe przyciski ....................................................................................................... 21
Przyciski Zapisz, Ładuj, Zapisz jako ................................................................................. 22
Zapis właściwości okna dialogowego .......................................................................... 22
Ładowanie właściwości okna dialogowego ................................................................. 22
2.6 Wskazówki ............................................................................................................................. 23
2.7 Pasek Stanu ............................................................................................................................ 24
2.8 Komunikaty ostrzeżeń............................................................................................................ 25
3
Używanie poleceń.......................................................................... 27
3.1 Wykonywanie polecenia ........................................................................................................ 27
TEKLA STRUCTURES 16
4
3.2 Powtarzanie polecenia ............................................................................................................ 28
3.3 Kończenie polecenia .............................................................................................................. 28
3.4 Cofanie polecenia ................................................................................................................... 28
3.5 Powtarzanie polecenia ............................................................................................................ 29
4
Tworzenie i modyfikacja obiektów ............................................... 31
4.1 Tworzenie obiektów ............................................................................................................... 31
4.2 Modyfikacja obiektu .............................................................................................................. 32
4.3 Usuwanie obiektu ................................................................................................................... 32
5
Wybieranie obiektów ..................................................................... 35
5.1 Przełączanie odwróconego podświetlania.............................................................................. 36
5.2 Przełączniki wyboru ............................................................................................................... 36
5.3 Zaznaczanie pojedynczych obiektów ..................................................................................... 37
5.4 Zaznaczanie wielu obiektów .................................................................................................. 37
5.5 Zaznaczanie uchwytów .......................................................................................................... 38
5.6 Zaznaczanie zespołów i szalunków........................................................................................ 39
5.7 Zaznaczanie zagnieżdżonych zespołów i komponentów ....................................................... 39
5.8 Zmiana zaznaczenia ............................................................................................................... 40
5.9 Przerywanie zaznaczania obiektu........................................................................................... 40
6
Kopiowanie i przesuwanie obiektów ............................................. 43
6.1 Duplikaty obiektów ................................................................................................................ 43
6.2 Kopiowanie obiektu ............................................................................................................... 44
Kopiowanie obiektu określając odległość od punktu początkowego ................................ 45
Kopiowanie linearne obiektu ............................................................................................. 46
Kopiowanie obiektu metodą "przeciągnij i upuść" ............................................................ 46
Kopiowanie obiektu do innej płaszczyzny......................................................................... 47
Kopiowanie obiektu do innego obiektu ............................................................................. 47
Kopiowanie obiektów z innego modelu............................................................................. 47
6.3 Przesuwanie obiektu............................................................................................................... 48
Przesuwanie obiektu określając odległość od punktu początkowego................................ 49
Przesuwanie linearne obiektu............................................................................................. 49
Przesuwanie obiektu metodą "przeciągnij i upuść" ........................................................... 50
Przesuwanie obiektu do innej płaszczyzny ........................................................................ 50
Przesuwanie obiektu do innego obiektu............................................................................. 51
6.4 Obracanie obiektów................................................................................................................ 51
Obrót obiektu na płaszczyźnie roboczej ............................................................................ 51
TEKLA STRUCTURES 16
5
Plik z chomika:
P_R_Z_E_MO
Inne pliki z tego folderu:
Wypożyczanie_licencji_160_PL.pdf
(442 KB)
Szablony_i_raporty_160_PL.pdf
(476 KB)
System_160_PL.pdf
(2678 KB)
Rysunki_160_PL.pdf
(4717 KB)
Podstawy_160_PL.pdf
(852 KB)
Inne foldery tego chomika:
00_Prywatne
PROGRAMY
zachomikowane
Zgłoś jeśli
naruszono regulamin