BATCH_E.PDF

Preface, Contents

System overview

Form Supplied/Installing/Starting

SIMATIC

Process Control System PCS7

BATCH flexible Object Manager

Recipe creation

BATCH flexible

Batch control

Automating

Batch Processes

Batch planning

Batch data management

Manual

Messages

Project planning with

BATCH flexible

This manual has the order number:

6ES7657-0XX01-8BA0

Appendices

Technical Data

ReportDesigner

List of abbreviations

Bibliography

Glossary, Index

Safety Guidelines

This manual contains notices which you should observe to ensure your own personal safety, as well as to

protect the product and connected equipment. These notices are highlighted in the manual by a warning

triangle and are marked as follows according to the level of danger:

Danger

indicates that death, severe personal injury or substantial property damage will result if proper precautions are

not taken.

Warning

indicates that death, severe personal injury or substantial property damage can result if proper precautions are

not taken.

Caution

indicates that minor personal injury or property damage can result if proper precautions are not taken.

Note

draws your attention to particularly important information on the product, handling the product, or to a particular

part of the documentation.

Qualified Personnel

The device/system may only be set up and operated in conjunction with this manual.

Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are

defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and sys-

tems in accordance with established safety practices and standards.

Correct Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the catalog or the technical

description, and only in connection with devices or components from other manufacturers which have been

approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed correctly, and

operated and maintained as recommended.

Trademarks

SIMATIC , SIMATIC NET and SIMATIC HMI are registered trademarks of SIEMENS AG.

Third parties using for their own purposes any other names in this document which refer to

trademarks might infringe upon the rights of the trademark owners.

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority.

Offenders will be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or design, are

reserved.

Siemens AG

Bereich Automatisierungs- und Antriebstechnik

Geschaeftsgebiet Industrie-Automatisierungssysteme

Postfach 4848, D-90327 Nuernberg

Disclaimer of Liability

We have checked the contents of this manual for agreement with the

hardware and software described. Since deviations cannot be

precluded entirely, we cannot guarantee full agreement. However,

the data in this manual are reviewed regularly and any necessary

corrections included in subsequent editions. Suggestions for

improvement are welcomed.

Siemens AG 1997

Technical data subject to change.

Siemens Aktiengesellschaft

6ES7657-0XX01-8BA0

Batch flexible, Manual

C79000 G7076 C650 02

Preface

Aim of this manual

This manual will provide you with all the information you will need to use

the BATCH flexible system. This principally includes

the system overview

installing and starting BATCH flexible- applications,

planning recipes (with BATCH flexible it is always apparatus recipes

which are planned, which is why the term recipe is used throughout the

manual ) ,

planning batches which depend on a production order and which use a

recipe to realize a concrete batch quantity,

the on-line operating and monitoring (O&M) of control recipes via batch

control,

the interfaces with the OS/PLC and bus systems and the requirements for

using the BATCH flexible -system,

planning and design aids for BATCH flexible.

The BATCH flexible -software has been designed in accordance with modern

ergonomics. Using the system is easy to learn and is for the most part

self-explanatory.

The basic information regarding user operations includes descriptionss of the

corresponding menu commands. However no guidance will be provided on

filling out dialog boxes since this information should preferably be obtained

by using the on-line help facility.

Readership

This manual has been written for people involved in planning and designing

BATCH systems, operating and monitoring control systems, in installation,

servicing and also operational supervision.

Requirements

A basic knowledge of using PCs and of working with Windows 95/NT is an

essential requirement.

Validity

This manual is valid for release 3.0 of the BATCH flexible software.

Batch flexible, Manual

C79000-G7076-C650-02

iii

Preface

Standard

The BATCH flexible software is based on the international standards DIN EN

61131-3 (IEC 1131-3) for programming languages and on ISA-SP88.01.

Note:

The ISA-SP88 standard contains many ’can’ formulations.

Accordingly, the procedure part of the master recipe may,

for example, contain unit recipe procedures, recipe

operations and recipe functions. BATCH flexible

implements set these ’can’ formulations in a manner

appropriate to practical requirements; for example, a

BATCH flexible recipe only contains one further

hierarchical level, which is designated an automation

function (AF). The AF can however take the form of a

unit recipe procedure, recipe operation or recipe function

(see Chapter 4, Recipe creation).

Location in the

information

landscape

This manual constitutes the documentation for BATCH flexible . As support

for your project planning, configuring and programming of an S7 automation

system, comprehensive user documentation is available which is intended to

be used selectively. The following explanatory material, together with the

following diagram, is provided to make the user documentation easier to use.

Batch flexible, Manual

C79000-G7076-C650-02

Preface

SIMATIC

Process Control System PCS 7

System

over-

view

/261/

Automating

Batch Processes

Manuals for

WinCC software

and hardware

BATCH

flexible

Manual

WinCC

Manual

/256/

/257/

/262/

Standard software

for S7 and M7

STEP 7

Manuals for

configuring tools

Reference manuals

for the blocks libraries

/263/

/264/

/265/

/266/

SFC

Library of

standar d

blocks

User

manual

Manual

/255/

/258/

/231/

/254/

/259/

/260/

SCL

FBD

Manuals for

S7-400 hardware

/250/

Program-

STL

Reference

manual

Manual

ming

/236/

Manual

/234/

LAD

/235 /

/232/

/100/

/101/

/102/

System Software for

S7-300 and S7/400

Program Design

/233//

System Software for S7-300 and S7/400

System and Standard Functions

Manuals for the language packages

Sy mb ol

Meaning

This documentation acts as an introduction to the methodology.

These are works of reference and therefore only to be used selectively.

The documentation is supplemented by on-line help.

/xxx/: Reference number in the bibliography

The order indicated here

is a suggestion for someone using an S7 for the first time.

Batch flexible, Manual

C79000-G7076-C650-02

CFC

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: