Routing Client Configuration.pdf
(
263 KB
)
Pobierz
Microsoft Word - Routing Client Configuration.doc
MikroTik Routing Client Configuration
Example Configuration
1) Set up the ip addresses
Click on IP -> Addresses
Click on the red + sign to add an ip address
Copyright Wi-Pipe
Page 1
Enter the address in the format aaa.bbb.ccc.ddd
/nn
where /nn is the subnet
mask. i.e. 192.168.1.1/24 = ip address 192.168.1.1, subnet 255.255.255.0.
Ensure the interface is ether1, then click on ok
Repeat to add an ip address for the WLAN1 interface
Copyright Wi-Pipe
Page 2
Copyright Wi-Pipe
Page 3
2) Setup the wireless interface
Click on wireless
Select WLAN1 and enable it by clicking on the blue tick icon
Double click on the interface to edit it’s details
Select the wireless tab
Select the frequency band from the frequency drop down list
Copyright Wi-Pipe
Page 4
Click on apply (IMPORTANT!)
Click on scan and then click on start to discover networks in range
Select the required network, click on connect and then click on close
Click on ok to save changes
An ‘R’ will appear beside the interface to show that it is connected and
Running.
Copyright Wi-Pipe
Page 5
Plik z chomika:
mrozek2002
Inne pliki z tego folderu:
WinBox.pdf
(117 KB)
MikroTik WDS 3.X.pdf
(640 KB)
MikroTik Ruter.pdf
(77 KB)
Mikrotik Ograniczenie p2p 3.X.pdf
(122 KB)
MikroTik Blokowanie p2p 3.X.pdf
(174 KB)
Inne foldery tego chomika:
IT
Linux
Mikrotik
MikroTik3
mikrotik4
Zgłoś jeśli
naruszono regulamin