SMFOT04GBB.PDF

(36 KB) Pobierz
SMFOT04GBB.PDF
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
SMART
FORTWO
YEAR 04 fi
PETROL
DIESEL
X
MAKE
MOD.
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment, on the
support of the shock absorber.
POWER SUPPLY
+30: connect to the 2 mm 2 RED wire in a multiway connector located at the
entrance of the fuse box.
-31: connect with a cable terminal to one of the ground terminals located behind
the left lateral panel, driver’s side.
IGNITION WIRE
+15/54: connect to the RED wire located at the position marked “E”, on the rear
of the fuse box.
DIRECTION INDICATORS
Connect to the 1 mm 2 GREEN and PINK wires located in the multiway
connector, on the rear of the fuse box,under the driver’s side dashboard.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
cut the 2 mm 2 GREEN wire directly on the coming out of the engine, driver’s
side.
Front window, passenger’s side:
cut the 2 mm 2 GREEN wire directly on the coming out of the engine,
passenger’s side.
CENTRAL DOORS LOCKING Original door motor direct control
Cut the 1,5 mm 2 WHITE/BLUE wire (unlock) and GREY/LIGHT BLUE wire
(lock) located on the rear of the fuse box. Refer to the “A section” of the
fitting diagram nr.222 for the 3100 and 3900 serie antithefts or to the ”B
section” of the fitting diagram nr. 222 for the Bridge serie antithefts.
IMMOBILISATION POINT 1
Fuel pump
Cut the GREY/GREEN wire located in a black connector on the front part of the
fuse box, under the dashboard, driver’s side.
IMMOBILISATION POINT 2
Inertial switch
Cut the 1 mm 2 BLUE wire of the inertial switch located on the left of the engine
compartment, above the brakes pump.
STARTER
+50: Cut the 1,5 mm 2 BLUE wire in the wiring harness located along the
steering column under the dashboard, driver’s side.
BONNET SWITCH
Install an additional switch on the headlamp support plate, near the left lateral
lamp.
DOORS AND BOOT SWITCH Connect to the BROWN/BLUE wire located in a black connector in the front part
of the fuse box, under the dashboard, driver’s side.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
smfot04gbb.doc
108363644.006.png 108363644.007.png 108363644.008.png
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM NR. 222
Diagram to make lock/unlock of the doors
on SMART FORTWO year 2004
A section
M
VIOLET/WHITE
ORANGE/WHITE
+30
VIOLET
YELLOW/BLACK
ORANGE
GREY/BLACK
GREY/LIGHT BLUE
WHITE/BLUE
connector located in the rear part of the fuse box
B section
M
VIOLET/ORANGE
+30
VIOLET
YELLOW/BLACK
ORANGE
GREY/BLACK
GREY/LIGHT BLUE
WHITE /BLUE
connector located in the rear part of the fuse box
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
smfot04gbb.doc
108363644.009.png 108363644.001.png 108363644.002.png 108363644.003.png 108363644.004.png 108363644.005.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin