RESCE02GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

RENAULT

MOD. SCENIC

YEAR 02 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the right of the bulkhead that divides

the engine compartment from the passenger’s compartment. To pass the cables

make a hole near the shock absorber, driver’s side.

CENTRAL UNIT POSITION

The modular systems and the modules should be positioned under the dashboard,

driver’s side.

POWER SUPPLY

+ 30: connect to the RED/BLACK wire located at the position nr.11 of the connector

marked PP5, in the fuse box.

- 31: connect with a cable terminal directly to the car body.

IGNITION WIRE

+ 15/54: connect to the YELLOW/VIOLET wire located at the position nr. 3 of the

connector marked PP1, in the fuse box.

DIRECTION INDICATORS

Connect to the LIGHT BROWN wire, at the position nr. 4, and to the ORANGE wire,

at the position nr. 8, in the connector marked PP2, behind the fuse box, under the

driver’s side dashboard.

ELECTRIC WINDOWS

Mixed control signals (Art. 2980)

Front window, driver’s side:

cut the 1,5 mm 2 LIGHT BROWN wire (positive).

Front window, passenger’s side:

cut both the 2 mm 2 BROWN/RED wire (positive) and the YELLOW/RED wire

(negative). Connections must be done in the wiring harness coming out of the

connector of the driver’s side door.

CENTRAL DOORS LOCKING Negative control signal

Connect to the VIOLET wire at the position nr. 5 (lock) and to the PINK wire at the

position nr. 6 (unlock), located in the connector marked PE4, in the fuse box.

IMMOBILISATION POINT

Fuel pump

Cut the WHITE wire located near the YELLOW/VIOLET wire (+15/54) of the

connector marked PP1, in the fuse box.

STARTER

+50 : Cut the WHITE wire, at the position nr. 6, in the wiring harness coming out of

the 6 way black connector, located under the steering column.

BONNET SWITCH

Install an additional switch on the front headlamp plate, driver’s side.

DOORS SWITCH

Connect to the GREY wire located at the position nr. 8, of the connector marked

PE4, in the fuse box.

BOOT SWITCH

Connect to the BROWN wire located at the position nr. 9, of the connector marked

PE4, in the fuse box.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

resce02gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: