HYCOU02GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

HYUNDAI

MOD. COUPE’

YEAR 02 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the driver’s side wheelhouse.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard.

POWER SUPPLY

+30: connect to the RED wire in the unipolar connector, marked ‘BCM-DE’ in the

frontal part of the fuse box.

-31: connect to one of the ground terminals.

IGNITION WIRE

+ 15/54: connect to the RED wire in the unipolar connector, marked ‘BCM-LM’ on

the rear part of the fuse box.

DIRECTION INDICATORS

Connect to the ORANGE wire, at the position nr. 17 and to the RED/ORANGE

wire, at the position nr. 13, in the 22 way connector, marked ‘BCM-FF’ in the front

part of the fuse box.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the ORANGE wire located in the10 way white connector coming out of the

switches panel, inside the driver’s side door.

Front window, passenger’s side:

cut the PINK wire located in the 8 way white connector coming out of the switches

panel, inside the passenger’s side door.

CENTRAL DOORS LOCKING Door original motor direct control

Cut the GREEN/BLACK wire, at the position nr. 8 (unlock), and the GREEN wire, at

the position nr. 6 (lock), in the 22 way connector, marked ‘BCM-FF’, in the frontal

part of the fuse box.

IMMOBILISATION POINT

Fuel pump

Cut the 2 mm 2 RED wire located in the wiring harness coming out of the 15 way

white connector, located behind the left lateral bulkhead, driver’s side.

STARTER

+50: Cut the WHITE wire located in the wiring harness of the 6 way white

connector coming out of the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the GREEN/ORANGE wire, at the position nr. 9, in the 20 way

connector, marked ‘BCM-HM’, behind the fuse box and to the GREEN/ORANGE

wire, at the position nr. 16, in the 16 way connector, marked '‘BCM-JM'’ behind the

fuse box.

BOOT SWITCH Connect to the YELLOW/BLACK wire, at the position nr. 8, in the 16 way

connector, marked ‘BCM-JM’, behind the fuse box.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

hycou02gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: