850ATARI.pdf

(1325 KB) Pobierz
Microsoft Word - Test-PDF.doc
----------------------------------------------------------------
Scanned in 1999 & Edited in 2000 by Walter Lojek from ABBUC e.V.
61900538.001.png
ATARI 850 Interface Module Owner's Manual - Page 2
---------------------------------------------------
ATARI ® 850
Interface Module
Owner's Manual
COPYRIGHT 1980 ATARI. INC.
Every effort has been made to ensure that this manual accurately documents
the Disk Operating System of the ATARI Personal Computer Systems. However,
due to the ongoing improvement and update of the computer software. ATARI,
INC. cannot guarantee the accuracy of printed material after the date of
publication, nor can ATARI accept responsibility for errors or omissions.
C015953 rev. 1
Re-Editor’s Note
This re-edited operator’s manual is available due to my never-ending
interest in ATARI 8-bit computer systems. Every effort is made to keep as
much information as possible in nearly original shape. However, neither
ATARI Writer nor ATARI printers were used to re-produce it and that is why
the layout is a little bit different. The advantages are fewer pages, less
typos, and better readability.
If you know someone who no longer has time to care for his 8-bit machine,
please, get him in touch with me. Currently, I am working to get a small
ATARI 8-bit museum up and running here in Germany. Therefore I appreciate
every piece of hardware or software for this collection.
Good Byte
Walter
----------------------------------------------------------------
Scanned in 1999 & Edited in 2000 by Walter Lojek from ABBUC e.V.
ATARI 850 Interface Module Owner's Manual - Page 3
---------------------------------------------------
Chapter 1 INTRODUCTION
------------
Unpacking
ATARI 850 [TM] Interface Module
ATARI 825 [TM] Printer
ATARI 830 [TM] Modem
Contents of this manual
How to use this manual
Chapter 2 SYSTEM CONFIGURATIONS
---------------------
Hoot-up
Power-up
Configurations using only the Printer Port of the ATARI 850 if you have
more than one ATARI printer
Configurations using only the ATARI 850 Modem with the 850
Configurations with Printer, Modem and Disk Drive
Configurations with the 410 Program Recorder
Chapter 3 SERIAL PORTS
------------
Overview
Default conditions
Limitations on Port configurations
Mode--block output or concurrent I/O
Block Output
Concurrent I/O Mode
Warnings and Restrictions
Configuring a Port
Setting the Baud, word size, stop bits and ready monitoring
Setting translation modes and parity
Controlling the outgoing lines DTR, RTS and XMT
Using a Port
Opening an R5-232-C Port
Closing an RS-232-C Port
Starting Concurrent I/O mode
Basic I/O statements GET, INPUT, PUT and PRINT
Other I/O commands from BASIC--LIST, SAVE, LOAD and ENTER
Forcing Early transmission of output blocks STATUS command
----------------------------------------------------------------
Scanned in 1999 & Edited in 2000 by Walter Lojek from ABBUC e.V.
ATARI 850 Interface Module Owner's Manual - Page 4
---------------------------------------------------
APPENDIX 1 What is R8-232-C?
APPENDIX 2 RS-232-C Port Error Conditions. Causes and Corrections
APPENDIX 3 Printer Port Error conditions. Causes and Corrections
APPENDIX 4 Meaning of (Error) Bits in Location 746 After STATUS command
APPENDIX 5 Setting the Baud, Word Size, Stop Bits and Ready Monitoring
APPENDIX 6 Translation and Parity Handling
APPENDIX 7 Controlling the Outgoing Lines DTR, RTS and XMT
APPENDIX 8 Starting Concurrent 110 mode
APPENDIX 9 User Programs
1. Programs to transfer BASIC source programs from computer to
computer.
2. Baudot Terminal Emulator
3. Example of Programming a Printer through an RS-232-C port
4. Another example of printer control through an RS-232-C port
5. Reading a digitizer: more input than BASIC can handle
APPENDIX 10 Code tables—ASCII, ATASCII, BAUDOT
APPENDIX 11 Principles of operation of the ATARI 850[tm] Interface Module
APPENDIX 12 Interface Module specifications
APPENDIX 13 ATARI 830[tm] Modem
----------------------------------------------------------------
Scanned in 1999 & Edited in 2000 by Walter Lojek from ABBUC e.V.
ATARI 850 Interface Module Owner's Manual - Page 5
---------------------------------------------------
TABLES and FIGURES
Table 2.1 Power-up procedure with various configurations
Table 2.2 Available control signals on ports 1, 2D 3 and 4
APPENDIX 1
Figure 1 Communications hoot-up showing role of RS-232-C
Table 1 The most common RS-232-C circuits
Table 2 RS-232-C electrical specifications
APPENDIX 4
Table 1 Decimal representation of the error bits in location 746
Table 2 Sense values added into location 747
APPENDIX 5
Table 1 Baud rate specifiers to add to Aux1 in XIO 36
Table 2 Word size specifiers to add to Aux1 in XIO 36
Table 3 Specifier for two stop bits to add to Aux1 in XIO 36
Table 4 Specifier to monitor DSR, CTS and CRX in Aux2 in XIO 36
APPENDIX 6
Table 1 Translation mode options added to Aux1 in XIO 38
Table 2 Input parity mode options added to Aux1 in XIO 38
Table 3 Output parity mode options added to Aux1 in XIO 38
Table 4 Append Linefeed options added to Aux1 in XIO 38
APPENDIX 7
Table 1 Control values for DTR added to Aux1 in XIO 34
Table 2 Control values for RTS added to Aux1 in XIO 34
Table 3 Control values for XMT added to Aux1 in XIO 34
APPENDIX 12
Figure 1. Pin functions of Serial Port No. 1 in ATARI 850[tm] Interface
Module (9-pin female connector).
Figure 2. Pin functions of Serial Ports No. 2 and 3 in ATARI 850
Interface Module (9-pin female connectors).
Figure 3. Pin functions of Serial Port No. 4 in ATARI 850[tm] Interface
Module (9-pin female connector).
Figure 4. Hook-up of Serial Port No. 4 with a 20mA loop device.
Figure 5. Pin functions of the Printer Port of the ATARI 850[tm]
Interface Module (15-pin female connector).
Figure 6. Printer Port timing diagram.
Figure 7. Schematic diagram of the ATARI 850[tm] Interface Module.
----------------------------------------------------------------
Scanned in 1999 & Edited in 2000 by Walter Lojek from ABBUC e.V.
Zgłoś jeśli naruszono regulamin