STAR Dot Matrix Printer NX-1000, LC-10 Series - Operations Manual.PDF

(3149 KB) Pobierz
Technical Manual LC-10 / LC-10C / LC-10II / NX-1000
DOT MATRIX PRINTER
NX-1000SERIES
LC-10SERIES
TECHNICAL MANUAL
[ NINTH EDITION ]
NOTICE
·
All rights reserved. Reproduction of any part of this manual
in any form whatsoever, without STAR’s express permis-
sion is forbidden.
·
The contents of this manual are subject to change without
notice.
·
All efforts have been made to ensure the accuracy of the
contents of this manual at the time of going to press.
However, should any errors be detected, STAR would
greatly appreciate being informed of them.
·
The above notwithstanding, STAR can assume no respon-
sibility for any errors in this manual.
© Copyright 1987 Star Micronics Co.,Ltd.
 
INTRODUCTION
1
2
3
4
5
6
7
8
This manual describes dot matrix printers as shown below.
It is intended for use as a reference for periodic inspections and maintenance procedures.
This manual is prepared for use at a technical level and not for the general user.
Model
Interface
Mono/Colour
Destination
Ver.
NX-1000MULTI-FONT PRINTER
Parallel Type
Monochrome
NX-1000CMULTI-FONT PRINTER
Commodore Type
Monochrome
Except for
European market
NX-1000COLOUR PRINTER
Parallel Type
Colour
Ver. 1
and
Ver. 1.5
NX-1000C COLOUR PRINTER
Commodore Type
Colour
LC-10 MULTI-FONT PRINTER
Parallel Type
Monochrome
LC-10CMULTI-FONT PRINTER
Commodore Type
Monochrome
For European
Market
LC-10 COLOUR PRINTER
Parallel Type
Colour
LC-10C COLOUR PRINTER
Commodore Type
Colour
NX-1000 II MULTI-FONT PRINTER
Parallel Type
Monochrome
For American
and Asian market
Ver. 2
For European and
Pacific market
LC-10 II MULTI-FONT PRINTER
Parallel Type
Monochrome
·
This manual is divided into the following sections:
Chapter 1
General Specifications
Chapter 2
Theory of Operation
Chapter 3
Adjustments
Chapter 4
Parts Replacement
Chapter 5
Maintenance and Lubrication
Chapter 6
Troubleshooting
Chapter 7
Parts List (Ver. 1 and Ver. 1.5)
Chapter 8
Parts List (Ver. 2)
Appendix
Explanation of Principle ICs
·
First edition
: Nov. 1987
Only Monochrome Type
APP.
Second edition
: Mar. 1988
Add Colour Type
Third edition
: Dec. 1988
Add Ver. 1.5 of Parallel Type
Fourth edition
: Jul. 1989
Add NX-1000 II and LC-10 II (Ver. 2 of Parallel Type)
Fifth edition : Apr. 1991
Sixth edition : Aug. 1993
Seventh edition :Sep. 1995
Eighth edition
:Apr. 1996
Ninth edition
:Aug. 1997
415633272.002.png 415633272.003.png
CHAPTER 1
GENERAL SPECIFICATIONS
1
2
3
4
5
6
7
1. General Specifications ......................................................................................... 3
1-1. Parallel Type ............................................................................................................ 3
1-2. Commodore Type.................................................................................................... 4
2. External Appearance and Composition .............................................................. 7
2-1. Names of Parts ........................................................................................................ 7
2-2. DIP switch settings ................................................................................................. 9
3. Connector Signals .............................................................................................. 11
3-1. Parallel Interface ................................................................................................... 11
3-2. Commodore Interface ........................................................................................... 12
8
A
415633272.004.png
GENERAL SPECIFICATIONS
– 2 –
415633272.001.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin