STAR LaserPrinter 4 - Series Parts List.pdf

(2994 KB) Pobierz
Technical Manual LaserPrinter 4 Series
LaserPrinter 4 Series
PARTS LIST
[SECOND EDITION]
i
415633279.001.png
INTRODUCTION
This Parts List contains listings of parts used in the laser printers as shown below. Diagrams are provided with the
listings to aid the service technician in clearly identifying the item to be ordered.
·
LaserPrinter 4
·
LaserPrinter 4 StarScript
·
LaserPrinter 4III
n
First edition : Feb. 1991 Only LaserPrinter 4
Second edition : Feb. 1992 Add LaserPrinter 4 StarScript and 4III
NOTICE
·
All rights reserved. Reproduction of any part of this manual in any
form whatsoever, without STAR’s express permission is forbid-
den.
·
The contents of this manual are subject to change without notice.
·
All efforts have been made to ensure the accuracy of the contents
of this manual at the time of going to press. However, should any
errors be detected, STAR would greatly appreciate being in-
formed of them.
·
The above notwithstanding, STAR can assume no responsibility
for any errors in this manual.
ii
© Copyright 1996 Star Micronics Co.,Ltd.
415633279.002.png
HOW TO USE PARTS LIST
A. Assembly Location Diagrams. These diagrams
show the locations of major assemblies of the
printer. Their names are identified in rectangular
boxes. Below each box is the number of the Figure
which shows an exploded view of the assembly.
(5) Quantity colum n. The quantity shown in
this column is the number of parts used in the
figure. However, the quantity listed for an assem-
bly indicates the number of that assembly per ma-
chine.
Finding a Parts Number. Refer to the Assembly
Location Diagrams and find the Figure Number of
the assembly of interest. Turn to the page(s), locate
the part on the exploded view, and find its Drawing
Number. Refer to the Parts List on the page facing
the exploded view and find the Drawing Number,
Part Number and quantity required for your type of
machine.
4 ............................................................ LaserPrinter 4
4S ....................................... LaserPrinter 4 StarScript
4III .................................................. LaserPrinter 4III
The letters (RF and AR) in this column indicate that
the quantity of a part is not specified, allowing the
use of the number of parts needed for assembly and
that the quantity cannot be mentioned clearly.
For screws, nuts, washers, retaining rings, pins,
and spacers which are used in all models, Drawing
Numbers that consist of one letter plus two digits
are shown on the exploded diagrams. To identify
these parts locate the Drawing Numbers in the “List
of Standard Fasteners” and find the Part Number(s).
(6) Remarks. When there are differences in the
specifications of the fuse, destinations, etc., the
differences are described in words or indicated by
two letters.
US ....... USA UK ....... United Kingdom
EC ....... EC AS ........ Australia
HK ...... Hong Kong JP ......... Japan
Note: While looking for a Part Number, pay par-
ticular attention to the voltage listed in the
REMARKS column to ensure that the Part
Number selected is for your type of ma-
chine. Immediate shipping or action regard-
ing the part depends on using its correct Part
Number.
The seal number of ROM in main logic board is
described in this column. The “**” mark of a seal
number is variable depending on the software ver-
sion.
(7) Rank. Parts marked “S” are Service Parts.
Service Parts are recommendable for maintenance.
Parts marked “N” are not stock items. They are
produced on a special-order basis.
Parts List pages. The Parts List pages contain the
following columns and information.
(1) Drawing Numbe r column. The first column
shows the Drawing Number of the illustration cor-
responding to the Parts List.
B. List of Standard Fasteners. This list incorporates
screws, nuts, washers and shim washers, retaining
rings, pins, and spacers that are used in all copies
(including optional equipment). These parts have
different Drawing Numbers from the usual Draw-
ing Numbers in each illustration. These parts are
not listed in the part number list corresponding to
the illustration.
(2) Revised Edition Mar k. This column shows
a revision number.
Parts that have been added in the revised edition are
indicated with “#”
Parts that have been abolished in the revised edi-
tion are indicated with “*”.
#1 : First edition
®
Second editon
C. Numerical Index. There is a Numerical Index at
the end of this catalog; it lists in numerical order
every Part Number contained in the Parts Lists. The
Numerical Index contains the following columns
and information.
*1 : First editon
®
Second edtion
(3) Part Numbe r. This column shows the Part
Number for the part. This Number must be indi-
cated when ordering the part. The part marked
“NPN” in this column do not have a Part Number
and are not stocked.
(1) Part Number. The first column shows the
Part Number.
(2) Drawing Number column. The second col-
umn lists the Drawing Number for each occurrence
of the part in the illustrations.
(4) Parts Name . Part names must be indicated
when ordering the part.
iii
415633279.003.png
CONTENTS
A.
ASSEMBLY LOCATION DIAGRAM ............................................... 1
100. EXTERNAL COVERS, PANELS, ETC. ............................................. 4
101. LEFT COVER ASSEMBLY ................................................................ 6
102. UPPER COVER ASSEMBLY ............................................................. 9
103. INTERNAL COVER ASSEMBLY ................................................... 10
104. INTERNAL COMPONENTS ............................................................ 12
105. MACHINE BOTTOM PLATE .......................................................... 14
200. H.V. CONTACT ASSEMBLY .......................................................... 16
240. DRIVE ASSEMBLY .......................................................................... 17
250. ROD ASSEMBLY .............................................................................. 18
340. PICK-UP ROLLER ASSEMBLY ...................................................... 19
350. FEEDER ASSEMBLY ....................................................................... 20
370. FACE-DOWN DELIVERY ASSEMBLY ......................................... 21
810. FIXING ASSEMBLY ........................................................................ 22
930. DC CONTROLLER PCB ASSEMBLY ............................................ 26
941. DENSITY ADJUSTING PCB ASSEMBLY ..................................... 29
950. EPL CARTRIDGE (TONER) ............................................................ 30
970. MAIN CONTROLLER UNIT ............................................................ 31
970B. MAIN CONTROLLER UNIT ............................................................ 33
971. MAIN LOGIC BOARD ..................................................................... 35
972. MAIN LOGIC BOARD ..................................................................... 50
980. H.V. POWER SUPPLY PCB ASSEMBLY ....................................... 64
985. RAM BOARD 1MB/2MB/4MB ........................................................ 66
985B. RAM BOARD 1MB/2MB/4MB ........................................................ 71
986. PS ROM BOARD ............................................................................... 74
987. FONT CARTRIDGE .......................................................................... 79
F10. CASSETTE FEEDER MAIN BODY ................................................ 82
F30. CASSETTE (A4, LGL) ...................................................................... 84
F31. CASSETTE (B5, LTR, EXEC) .......................................................... 86
F32. CASSETTE (ENVELOPE) ................................................................ 88
F90. CASSETTE FEEDER PCB ASSEMBLY .......................................... 90
B.
LIST OF STANDARD FASTENERS ................................................ 91
C.
NUMERICAL INDEX ....................................................................... 96
D.
WIRING SCHEME OF THE PRINTER .......................................... 100
iv
FIGURE- A ASSEMBLY LOCATION DIAGRAM — 1/3
1
415633279.004.png
Zgłoś jeśli naruszono regulamin