Tiburon Plans.pdf

(144 KB) Pobierz
Tiburon Plans.dc
All hinging for control surfaces can be packing
tape or actual hinges. I prefer robart hinge
points epoxied in place for the added longivity
and control freeness. CA hinges work well also.
Push/Pull
Pull Pull
Cut Control horns from 1/32"
ply or a plastic coffee can lid.
Motor/Battery Info
Mount Battery Pack
with 1" Velcro strap.
Also use adhesive
Velcro on the side of
fuselage and back of
pack to secure in
place.
Motor Gearing Prop Battery Amp Draw Thrust
GWS EPS350C DS (6.6:1) GWS 12x6 2s1p Lipo 9.5 17.1 oz.
GWS EPS350C DS (6.6:1) GWS 11x4.7 3s1p Lipo 11.5 24.3 oz.
Hacker B20-26S 4:1 Planetary APC 11x4.7 3s1p LiPo 11 amps 22.1 oz.
Hacker B20-31S 4:1 Planetary APC 11x4.7 3s1p LiPo 7.7 amps 18.6 oz.
Hacker B20-15L 4:1 Planetary APC 11x4.7 3s2p LiPo 19.5 amps 38.5 oz.
Hacker B20-15L 4:1 Planetary APC 11x4.7 2s1p LiPo 10.8 amps 20.6 oz.
Hacker B20-18L 4:1 Planetary APC 11x4.7 3s1p LiPo 11.7 amps 27.7 oz.
Hacker B20-18L 4:1 Planetary APC 12x6 3s2p LiPo 19 amps 36.7 oz.
Razor RZ300 GWS/5.3:1 GWS 11x4.7 2s1p LiPo 8.8 amps 15.7 oz.
Razor RZ300 GWS/5.3:1 GWS 12x6 2s1p LiPo 9.9 amps 18.5 oz.
Razor RZ300 GWS/6.6:1 GWS 11x4.7 3s1p LiPo 12 amps 26 oz.
Razor RZ350 GWS/6.6:1 GWS 12x6 3s1p LiPo 12.4 amps 27 oz.
Razor RZ350 GWS/6.6:1 GWS 11x4.7 3s1p LiPo 8.7 amps 21.2 oz.
Razor MicroHeli v2 GWS/6.6:1 GWS 12x6 3s1p LiPo 8.9 amps 22.8 oz.
PJS 3D 500 Direct APC 10x4.7 3s2p LiPo 16.4 amps 21.9 oz.
PJS 3D 550 Direct APC 10x4.7 3s2p LiPo 13.8 amps 20.7 oz.
HiMax HA2015-3600 GWS/5.3:1 GWS 12x6 3s1p LiPo 8.7 amps 20.5 oz.
HiMax HA2015-3600 GWS/6.6:1 GWS 12x6 3s1p LiPo 6.5 amps 18.5 oz.
HiMax HA2015-4100 GWS/6.6:1 GWS 12x6 3s1p LiPo 11.2 amps 26.4 oz.
HiMax HA2015-4100 GWS/5.3:1 GWS 11x4.7 3s1p LiPo 11.6 amps 25.2 oz.
HiMax HA2015-5400 GWS/6.6:1 GWS 12x6 2s1p LiPo 10.2 amps 17.8 oz.
HiMax HA2025-3236 3.6:1 Planetary APC 11x4.7 3s2p LiPo 14 amps 29.3 oz.
HiMax HA2025-3236 3.6:1 Planetary APC 12x6 3s2p LiPo 17 amps 32.2 oz.
HiMax HA2025-4236 4.3:1 Planetary APC 11x4.7 3s2p Lipo 20.2 amps 38.1 oz.
Laser cut 1/4" birch motor block.
Epoxy into plane. DO NOT use
CA on the moutor mount.
6 mm Depron Fuselage
Notes on the fuse:
Make sure to use 5-15 minute epoxy for the main
parts...foam CA are not strongenough, and will crack
under the torque.
3/16" zipties
www.3DFoamy.com
6 mm Depron Fuse Rails
Elevator Servo (HS-56HB Shown)
LiPo Battery
2100(3s2p)
Rudder Servo (HS-56HB Shown)
GWS 350 D motor Gear box.
6
1/8 lite ply gear mount plates
5
Hacker B20-15L shown
Use 2-56 screw threaded into
servo arm to tention pull-pull lines. As you
tighten the screw down, it wraps up
the line, tightening it.
4
Vacuum Formed
Wheel Pants
Carbon Tail wheel bracket
3
2
.188 Carbon Spar
1
Cut a "V" groove
in foam for
spars. Pull spar
through groove
to make round
1
2
3
4
5
6
Weight
10.5-15.5 oz.
Thrust
24-39 oz.
Radio
4-5 Chanel
Area
299.8 in2
Loading
5.0-7.7 oz/ft2
WWW.3DFOAMY.COM
Specs:
Tiburon 3D
Copyright © 2004 3DFoamy.com.
All rights reserved.
Designed and Drawn by
Matt Putman and Levi Jordan
Updated: 08/15/2004
3D Foamy
60281234.013.png 60281234.014.png 60281234.015.png 60281234.016.png 60281234.001.png 60281234.002.png 60281234.003.png 60281234.004.png 60281234.005.png 60281234.006.png 60281234.007.png 60281234.008.png 60281234.009.png 60281234.010.png 60281234.011.png 60281234.012.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin