VOV7097GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

VOLVO

V 70

YEAR 97 ﬁ

PETROL

DIESEL

MAKE

MOD.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment. It is

suggested to displace the connector of the brake oil bowl then modify a support

brake.

POWER SUPPLY

+ 30: connect to the general supply wiring at the entrance of the fuse box.

- 31: connect with a ring terminal to one of the terminals coming out of the

original power supply behind the left lateral panel, passengers side.

IGNITION WIRE

+ 15/54: connect to the wire marked “+ 15” in the wiring harness coming out of

the connector of the ignition key.

DIRECTION INDICATORS

Connect to the GREEN and LIGHT BLUE/GREEN wires in the wiring harness

located in the lowest part of the steering column.

ELECTRIC WINDOWS

At rest negative

Front window, drivers side: cut the LIGHT BLUE/GREEN wire directly in the

wiring harness coming out of the engine in the front door, drivers side.

Front window, passengers side: cut the 2 mm 2 LIGHT BLUE/WHITE wire.

Rear window, drivers side: cut the 2 mm 2 GREY/GREEN wire.

Rear window, passengers side: cut the 2 mm 2 GREEN/WHITE wire.

Connections to be effected in the wiring harness coming out of the respective

doors.

CENTRAL DOORS LOCKING Negative control signal

Connect to the GREY/RED wires (unlock) and YELLOW/GREY (lock) located in

the wiring harness coming out of the first connector on the right of the central

door locking unit located at left under the dashboard, drivers side.

IMMOBILISATION POINT 1

Fuel pump

Cut the 1 mm 2 PINK wire located in one of the wiring harness under the

dashboard, drivers side.

IMMOBILISATION POINT 2

Injection key

Cut the 1 mm 2 BLUE/RED wire located in the wiring harness coming out of the

ignition key.

STARTER

+ 50: cut the 1 mm 2 WHITE/YELLOW wire located in the wiring harness, in the

multiway connector of the fuse box.

BONNET SWITCH

Install an additional switch on the front left headlamp support plate.

DOORS SWITCH

Connect to the WHITE/YELLOW, WHITE/GREY and YELLOW/BROWN wires

located in the wiring harness coming out of the connector of the central door

locking unit and to the 0,5 mm 2 WHITE/BLACK wire located in the wiring

harness coming out of the lamp at the drivers foots place.

BOOT SWITCH

Connect to the wire coming out of the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

vov7097gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: