FIDOB01GBD.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE

FIAT

MOD. DOBLO’ YEAR. 01 ﬁ

PETROL

DIESEL

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment, on the support

of the shock absorber, passenger’s side. Pass the cables through one of the presetting

located in the original rubber sleeve near the valve of the servobrake.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard, driver’s side.

POWER SUPPLY

+ 30: connect to the 4 mm 2 RED wire located in a multiway connector in the fuse box.

- 31 : connect to one of the original ground terminal located behind the left lateral

bulkhead, driver’s side.

IGNITION WIRE

Connect to the ORANGE wire at the position nr. 14 in the 20 way brown connector

located in the former part of the fuse box, under, on the left of the dashboard, driver's

side.

DIRECTION INDICATORS

Connect to the RED/GREEN wire located at the position nr. 12 in the 40 way black

connector, located in the former part, of the fuse box, under, on the left of the

dashboard, driver's side.

ELECTRIC WINDOWS

Negative control signal

Front window, driver’s side:

cut the YELLOW/GREEN wire.

Front window, passenger’s side:

cut the LIGHT BLUE/BLACK wire.

These connections are made in the wiring harness coming out of the respective original

switches in the central part of the dashbboard under the presetting of the car radio.

CENTRAL DOORS LOCKING Negative control signal

Connect to the BLACK/LIGHT BLUE wire located at the position nr. 17 (unlock) and to

the WHITE/BLACK wire located at the position nr. 35 (lock) placed in the wiring harness

coming out of the 40 way black connector located in the former part of the fuse box,

under, on the left of the dashboard, driver’s side.

IMMOBILISATION POINT 1

Gasoil pump

Cut the BROWN wire located in the wiring harness coming out of the connector of the

inertial switch placed behind the lateral panel, passenger’s side.

STARTER CUT OFF

+50: Cut the BROWN wire located in the wiring harness coming out of the connector of

the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the LIGHT BLUE/YELLOW wire located at the position nr. 21 on the coming

out of the 40 way black connector placed in the former part of the fuse box, under, on

the left of the dashboard, driver’s side.

BOOT SWITCH

Connect to the RED/GREEN wire located at the position nr. 36 coming out of the 40

way black connector placed in the former part of the fuse box, under, on the left of the

dashboard, driver’s side.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fidob01gbd.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: