FIULY03GBBT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FIAT

MOD. ULYSSE* YEAR. 03 ﬁ

PETROL

DIESEL

MAKE

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment on

the side of the coolant bowl. Pass the cables using the oval rubber core hitch

above the right front shock absorber, behind the covering. It is suggested to

take down the passenger’s side glove compartment.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the left side of the

dashboard, driver’s side.

POWER SUPPLY

+30: connect to the 6 mm 2 WHITE wire located in the 2 way connector

coming out of the BSI central.

-31: connect to the original ground terminal located behind the driver’s side

left lateral bulkhead.

WAY CONNECTOR

+15/54: connect to the 1,5 mm 2 YELLOW wire, at the position nr. 6, in the

wiring harness coming out of the 16 way grey connector, in the fuse box.

DIRECTION INDICATORS

Connect to the WHITE wire at the position nr. 13, and to the BROWN wire at

the position nr. 14, located in the 16 way black connector, in the fuse box.

ELECTRIC WINDOWS

Positive control signal

To obtain the windows closing it is necessary to intervene directly in the

wiring harness coming out of each motor, inside to each door.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

Refer to the fitting diagram nr.180.

IMMOBILISATION POINT

Fuel pump

Cut the ORANGE wire, at the position nr. 16, of the 16 way black connector

located in the fuses holder box, on the right, in the engine compartment.

STARTER

+50: Cut the 1,5 mm 2 WHITE wire located in the connector coming out of the

ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate, near the bonnet

bumper rubber.

DOORS SWITCH

Connect to the BROWN wire, at the position nr. 32, coming out of the 40 way

white covering connector, in the BSI central.

Note: it is a control with positive polarity.

BOOT SWITCH

Connect to the LIGHT BLUE wire, at the position nr.16, located in the wiring

harness coming out of the 40 way grey connector, in the BSI central.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fiuly03gbbt.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM NR.180

Art . 3800

40 way white 16 way grey

connector connector

ORANGE/WHITE

+30

nr.27 nr.29 nr.13 nr.15 YELLOW/BLACK GREY/BLACK

Diodes 1N4004 VIOLET/WHITE

ground

Diodes 1N5406

M YELLOW

VIOLET

ORANGE

Direction Diode 1N5406

indicator

White, pos. nr.13 in the

16 way black connector

Driver’s side Passenger’s side

front door switch front door switch

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fiuly03gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: