hcpl0531.pdf

(207 KB) Pobierz
HCPL-2530
Dual Channel, High Speed
Optocouplers
Technical Data
HCPL-2530 HCPL-0530
HCPL-2531 HCPL-0531
HCPL-4534 HCPL-0534
s Minimum Common
Mode Transient Immunity at
V CM = 1500 V
(HCPL-4534/0534)
• High Speed: 1 Mb/s
• TTL Compatible
• Available in 8 Pin DIP, SO-8,
and 8 Pin DIP – Gull Wing
Surface Mount (Option 020)
Packages
• High Density Packaging
• 3 MHz Bandwidth
• Open Collector Outputs
• Guaranteed Performance
from 0
Applications
• Line Receivers – High
Common Mode Transient
Immunity (>1000 V/
Description
These dual channel optocouplers
contain a pair of light emitting
diodes and integrated photodetec-
tors with electrical insulation
between input and output.
Separate connection for the
photodiode bias and output
transistor collectors increase the
speed up to a hundred times that
of a conventional phototransistor
coupler by reducing the base-
collector capacitance.
s) and
Low Input-Output Capacitance
(0.6 pF)
• High Speed Logic Ground
Isolation – TTL/TTL, TTL/
LTTL, TTL/CMOS, TTL/LSTTL
• Replace Pulse Transformers
– Save Board Space and Weight
• Analog Signal Ground
Isolation – Integrated Photon
Detector Provides Improved
Linearity over Phototransistor
Type
• Polarity Sensing
• Isolated Analog Amplifier –
Dual Channel Packaging
Enhances Thermal Tracking
m
C
• Safety Approval
UL Recognized – 2500 V rms
for 1 minute (5000 V rms for
1 minute for Option 020) per
UL1577
CSA Approved
• Single Channel Version
Available (4502/3, 0452/3)
• MIL-STD-1772 Version
Available (55XX/65XX/4N55)
C to 70
°
Functional Diagram
ANODE 1
1
8
V CC
TRUTH TABLE
(POSITIVE LOGIC)
LED
ON
OFF
CATHODE 1
2
7
V O1
LOW
HIGH
V O
CATHODE 2
3
6
V O2
ANODE 2
4
5
GND
A 0.1 mF bypass capacitor between pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
m
Features
• 15 kV/
°
199627632.049.png 199627632.060.png 199627632.071.png 199627632.075.png
2
These dual channel optocouplers
are available in an 8 Pin DIP and
in an industry standard SO-8
package. The following is a cross
reference table listing the 8 Pin
DIP part number and the
electrically equivalent SO-8 part
number.
The SO-8 does not require
“through holes” in a PCB. This
package occupies approximately
one-third the footprint area of the
standard dual-in-line package.
The lead profile is designed to be
compatible with standard surface
mount processes.
The HCPL-2531/0531 is designed
for high speed TTL/TTL
applications. A standard 16 mA
TTL sink current through the
input LED will provide enough
output current for 1 TTL load and
a 5.6 k
W
SO-8
The HCPL-2530/0530 is for use in
TTL/CMOS, TTL/LSTTL or wide
bandwidth analog applications.
Current transfer ratio (CTR) for
the HCPL-2530/0530 is 7%
minimum at I F = 16 mA.
8 Pin DIP
Package
The HCPL-4534/0534 is an
HCPL-2531/0531 with increased
common mode transient immunity
of 15,000 V/
HCPL-2530
HCPL-0530
HCPL-2531
HCPL-0531
HCPL-4534
HCPL-0534
s minimum at
V CM = 1500 V guaranteed.
m
Selection Guide
Widebody
Minimum CMR
8-pin DIP (300 Mil)
Small-Outline SO-8
(400 Mil)
Hermetic
Current
Dual
Single
Dual
Single
Single
Single and
dV/dt
V CM Transfer
Channel
Channel
Channel
Channel
Channel
Dual Channel
(V/
s)
(V) Ratio (%) Package
Package*
Package
Package*
Package*
Packages*
1,000
10
7
HCPL-2530
6N135
HCPL-0530 HCPL-0500
HCNW135
19
HCPL-2531
6N136
HCPL-0531 HCPL-0501
HCNW136
HCPL-4502
HCPL-0452 HCNW4502
15,000 1500
19
HCPL-4534 HCPL-4503 HCPL-0534 HCPL-0453 HCNW4503
1,000
10
9
HCPL-55XX
HCPL-65XX
4N55
*Technical data for these products are on separate HP publications.
pull-up resistor. CTR of
the HCPL-2531/0531 is 19%
minimum at I F = 16 mA.
m
199627632.001.png
 
3
Ordering Information
Specify Part Number followed by Option Number (if desired).
Example:
HCPL-2531# XXX
020 = UL 5000 V rms/1 Minute Option*
300 = Gull Wing Surface Mount Option†
500 = Tape and Reel Packaging Option
Option data sheets available. Contact your Hewlett-Packard sales representative or authorized distributor for
information.
*For HCPL-2530/1 and HCPL-4534 only.
†Gull wing surface mount option applies to through hole parts only.
Schematic
1
I F1
I CC
V CC
+
8
V F1
I O1
V O1
–
7
2
3
I F2
–
I O 2
V O2
V F2
6
+
4
5
GND
HCPL-4534/0534 SHIELD
USE OF A 0.1 µF BYPASS CAPACITOR CONNECTED
BETWEEN PINS 5 AND 8 IS RECOMMENDED.
199627632.002.png 199627632.003.png 199627632.004.png
 
4
Package Outline Drawings
8-Pin DIP Package (HCPL-2530/2531/4534)
9.65 ± 0.25
(0.380 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
TYPE NUMBER
8
7
6
5
6.35 ± 0.25
(0.250 ± 0.010)
OPTION CODE*
HP XXXXZ
DATE CODE
YYWW
1
2
3
4
UL
RECOGNITION
1.19 (0.047) MAX.
1.78 (0.070) MAX.
5° TYP.
0.254 + 0.076
- 0.051
(0.010 + 0.003)
- 0.002)
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
* MARKING CODE LETTER FOR OPTION NUMBERS.
"L" = OPTION 020
OPTION NUMBERS 300 AND 500 NOT MARKED.
8-Pin DIP Package with Gull Wing Surface Mount Option 300 (HCPL-2530/2531/4534)
PAD LOCATION (FOR REFERENCE ONLY)
9.65 ± 0.25
(0.380 ± 0.010)
1.016 (0.040 )
1.194 (0.047)
8
7
6
5
4.826
(0.190)
TYP.
6.350 ± 0.25
(0.250 ± 0.010)
9.398 (0.370)
9.906 (0.390)
1
2
3
4
1.194 (0.047)
1.778 (0.070)
0.381 (0.015 )
0.635 (0.025)
1.780
(0.070)
MAX.
9.65 ± 0.25
(0.380 ± 0.010)
1.19
(0.047)
MAX.
7.62 ± 0.25
(0.300 ± 0.010)
0.254 + 0.076
- 0.051
(0.010 + 0.003)
- 0.002)
4.19
(0.165) MAX.
1.080 ± 0.320
(0.043 ± 0.013)
0.635 ± 0.25
(0.025 ± 0.01 0)
12° NOM.
2.54
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
0.635 ± 0.130
(0.025 ± 0.005)
199627632.005.png 199627632.006.png 199627632.007.png 199627632.008.png 199627632.009.png 199627632.010.png 199627632.011.png 199627632.012.png 199627632.013.png 199627632.014.png 199627632.015.png 199627632.016.png 199627632.017.png 199627632.018.png 199627632.019.png 199627632.020.png 199627632.021.png 199627632.022.png 199627632.023.png 199627632.024.png 199627632.025.png
5
Small Outline SO-8 Package (HCPL-0530/0531/0534)
8765
5.994 ± 0.203
(0.236 ± 0.008)
XXX
YWW
3.937 ± 0.127
(0.155 ± 0.005)
TYPE NUMBER
(LAST 3 DIGITS)
DATE CODE
PIN ONE
1
0.406 ± 0.076
(0.016 ± 0.003)
1.270
(0.050) BSG
5.080 ± 0.127
(0.200 ± 0.005)
7°
45° X
0.432
(0.017)
3.175 ± 0.127
(0.125 ± 0.005)
1.524
( 0 .060)
0 ~ 7°
0.228 ± 0.025
(0.009 ± 0.001)
0.203 ± 0.102
(0.008 ± 0.004)
*
TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010)
0.305
(0.012) MIN.
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
Solder Reflow Temperature Profile (HCPL-0530/0531/0534 and Gull Wing Surface
Mount Option Parts)
260
240
D
T = 145°C, 1°C/SEC
220
200
180
160
140
120
100
80
60
40
20
0
D
T = 115°C, 0.3°C/SEC
D
T = 100°C, 1.5°C/SEC
0
1
2
3
4
5
6
7
8
9
10
11
12
TIME – MINUTES
Note: Use of nonchlorine activiated fluxes is highly recommended.
Regulatory Information
The devices contained in this data
sheet have been approved by the
following organizations:
UL
Recognized under UL 1577,
Component Recognition
Program, File E55361.
CSA
Approved under CSA Component
Acceptance Notice #5, File CA
88324.
*
199627632.026.png 199627632.027.png 199627632.028.png 199627632.029.png 199627632.030.png 199627632.031.png 199627632.032.png 199627632.033.png 199627632.034.png 199627632.035.png 199627632.036.png 199627632.037.png 199627632.038.png 199627632.039.png 199627632.040.png 199627632.041.png 199627632.042.png 199627632.043.png 199627632.044.png 199627632.045.png 199627632.046.png 199627632.047.png 199627632.048.png 199627632.050.png 199627632.051.png 199627632.052.png 199627632.053.png 199627632.054.png 199627632.055.png 199627632.056.png 199627632.057.png 199627632.058.png 199627632.059.png 199627632.061.png 199627632.062.png 199627632.063.png 199627632.064.png 199627632.065.png 199627632.066.png 199627632.067.png 199627632.068.png 199627632.069.png 199627632.070.png 199627632.072.png 199627632.073.png 199627632.074.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin