TipsTricks_EMEAI.pdf

GEFORCE ®

3D VISION ™

TIPS AND TRICKS

诀窍和技巧

實用秘訣與技巧

ヒント

팀 및 트릭

GEFORCE ®

3D VISION ™

TIpS & TRICkS

Ensure GeForce

3D Vision Glasses

are Working

You must fully charge your GeForce ®

3D Vision ™ glasses for at least three hours

before using them for the irst time.

You can check the battery level of your glasses

by pressing the ON button on the left temple.

If the light next to the button is green, you have

up to 40 hours of battery life remaining. Actual

battery life is dependent on the recharge time.

If the light is red, you have less than two

hours remaining and it is recommended

that you recharge your glasses.

If the light does not turn on, the

battery is drained and the glasses

must be recharged.

If you are charging GeForce 3D Vision glasses by

connecting them to your PC using a USB cable,

make sure your PC does not go into power save

mode. When your PC goes into power save mode,

GeForce 3D Vision glasses are no longer charging.

To ix this, disable any power saving options

on your PC under the Windows Control Panel.

Alternatively, you can use a USB wall charging

device to charge the glasses directly from your

wall power outlet without connecting to the PC.

You can use your glasses while they are charging.

Ensure You

Use the Proper

DVI Cable

Make sure you use the DVI cable that was

shipped with your GeForce 3D Vision-Ready

120Hz LCD display. This is a standard dual-link

DVI cable and GeForce 3D Vision will not

operate without it.

DUAL-LINK DVI

Ensure

Stereoscopic

3D is Enabled

Make sure you have:

Activated the IR emitter. Press the green

ON/OFF button on the front of the emitter.

Emitter is on when the button is bright green.

Activated the GeForce 3D Vision

glasses. Press the ON button on top

of the left temple. The glasses turn off

after 10 minutes of non-activity.

Checked the

Enable stereoscopic 3D

setting in the NVIDIA Control Panel ›

Set Up Stereoscopic 3D screen.

Place IR Emitter

in Line-of-Sight

to Glasses

Ensure there is direct line-of-sight between the

IR emitter and your GeForce 3D Vision glasses

(a minimum of 1.5 feet [45cm]). Any obstructions

may cause the glasses not to function properly

causing the lenses to licker or turn off.

Do not place objects too close to, or in front

of, the emitter which could block the signal

(e.g. keyboard, coffee mug, etc.) Also,

make sure not to place your hand or other

objects in front of the IR receiver on the

glasses; located near the front left lens.

1.5 FT +

Run the

Setup Wizard

To verify your hardware is operating properly,

right click on the desktop and select the

NVIDIA Control Panel option. In the NVIDIA

control panel, select Stereoscopic 3D › Set Up

Stereoscopic 3D . Select Run Setup Wizard from

the Test Stereoscopic 3D drop down menu.

Environment

and Light

Flickering

Flicker in your peripheral vision with LCD displays

can be caused by differences in the operating

frequencies of GeForce 3D Vision and the lighting

in your room. This type of licker can be avoided by

turning off the lights or changing the stereoscopic

3D refresh rate. To see the refresh rates, run the

Setup Wizard (see Run Setup Wizard ). When you

get to the page asking about licker, select Yes . You

can then select from the following refresh rates:

120 Hz refresh rate for use in North

America when lights are on,

110 Hz refresh rate for daytime

and when lights are off,

100 Hz refresh rate for countries with 50

Hz lighting and when lights are on.

Once you have selected a refresh rate on the

Setup Wizard screen, click the Te s t button

to verify that the new refresh rate helps to

reduce environmental licker. Once you have

found the best setting, select Next to continue

on and inish the wizard setup process.

Games Are

Not Running in

Stereoscopic 3D

If your game is not functioning in stereoscopic

3D, look at the list of compatible games shown on

the NVIDIA Control Panel › View Compatibility

with Games screen. Verify that your game has

been tested by NVIDIA and has been ranked

as Excellent, Good, or Fair. Review the NVIDIA

recommended settings listed at the bottom right

side of the screen when the game is launched.

Make any adjustments recommended by NVIDIA

to make your gaming experience better. If the

NVIDIA recommended settings are not showing

and stereoscopic is turned on, press Ctrl-Alt-

Insert to enable them. NVIDIA is continually

updating the list of supported games.

Please go to www.nvidia.com/3dvision for the

latest list of games.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: